What did you do today to your 3/S?

I looked at a 94 Stealth R/T TT for sale and talked shop.

Quote:

---

Originally Posted by R/T93

I miss those wheels :(

Sent from my SCH-I535 using Tapatalk 4 Beta

---

Why? Weight? Yours look much better, imo.

Quote:

---

Originally Posted by TT4ME

Finally pulled my pan to knock out the dents. There was some interesting material stuck to the pick up and in the bottom of the pan - leaf-like.

https://fbcdn-sphotos-a-a.akamaihd.n...37304315_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.n...96511430_n.jpg

---

I'd have a real hard time not pulling at least a couple rod caps...... Good luck.

Quote:

---

Originally Posted by sublime_whatigo

http://img.tapatalk.com/d/13/06/30/e2e2uhe6.jpg

Did a bunch of things. Now just looking at the beauty's in my garage.

---

I will save you the typing :lol:

what he did:
Struts (all)
Adjs. Rear Control Arms & Boots
Front Tie-rod Ends
Front & Rear Anti-Sway Bars
IPS Baffled Oil Pan
3rd Gen Lifters
Valve Covers (powder coated)
Krank Vent Kit
GZP Cam Gears
Spark Plug Wires
Spark Plugs
TT Plenum (powder coated)
Plenum Spacer
EGR Block Off Plates
T/B Spacer
Plenum Junction Cover
Greddy Type S Blow Off Valve
Pre-Turbo Pipes (powder coated)
OEM Gaskets
Stillen D/P (ceramic coated)
3SX Rear Pre-Cat Delete (ceramic coated) MAJOR P.I.T.A.
3SX Poly Motor Mounts
JDM Front Brake Ducts
Change Out Engine Oil
Change Out Transmission Oil
Change Out Transfer Case Oil
Change Out Rear Differential Oil
Adjust Front Spoiler
Swap Rear Calipers
DOT-4 Brake Fluid
Rear Rotors

Started it!

LOL, thanks Steve. My hands are a bit sore :lol:

Quote:

---

Originally Posted by AdamVR4

I'd have a real hard time not pulling at least a couple rod caps...... Good luck.

---

I dropped the pan as PM... no issues to speak of before. I have 10k miles on the car - 80k total.

Oil pickup has been replaced. I cleaned the pan and banged out the dents best I could. I'm planning on putting it back together tomorrow.

I am a bit cautious about pulling the rod caps. It seems that people that do that end up with catastrophic failure a couple thousand miles later... I have wiggled the caps and each one moves less than 1 mm - best I can judge.

The material on the pickup is silicone along with a little bit of leaves (no idea there.) The crap in the pan is roughly .5 oz total.

Please tell me if I should do something else before reassembling. Thanks.

Ultra Black seems to be a good choice for the RTV. I just did the whole 6 speed trans with it and it doesn't leak at all

Installed an NGK AFX. Just wired directly to the battery with a simple switch inline. I'll swap that out for a relay at a later date.

http://i299.photobucket.com/albums/m...ps73605d3c.jpg

Spent two hours washing and waxing it yesterday just to take it out and get stuck in a thunderstorm.

Planning on installing ss brake lines on the other one today. Been sitting two months with a broken bake line, just haven't had the motivation to fix it.