So who wants their ECU's "Chromed"?

I have not matched the periphery setup that Aaron posted. Is that on the first page? I'm slowly working my way down the page reading all the links..lol

Here is the list of codes:
P0155
P0161
P0135
P0141
P0443
P0446
P0103
P1104
P1105
P0110
P0100

EDIT: apparently its not on the first page according to your conversation on top

Quote:

---

Originally Posted by Intropy

Can someone tell me what the "golden" setup would be for a 94 VR-4? New 99 VR-4 ECU and Tactrix 2.0 cable? Is that it? Any other adapters?

---

add a map sensor and conversion harness but yeah that would be it.

Quote:

---

Originally Posted by NOMIEZVR4

I have not matched the periphery setup that Aaron posted. Is that on the first page? I'm slowly working my way down the page reading all the links..lol

Here is the list of codes:
P0155
P0161
P0135
P0141
P0443
P0446
P0103
P1104
P1105
P0110
P0100

EDIT: apparently its not on the first page according to your conversation on top

---

YOu should check your o2s are going to the right pins on the 98/99 ecu. The manuals contradict themselves on these pins.
You may have an issue with your maf haness too.

Quote:

---

Originally Posted by Jesters Deadd

add a map sensor and conversion harness but yeah that would be it.

---

Does the conversion harness just change the pinout? (In other words, can I just rewire the 94's harness?)

Does any map sensor work or has to be stock?

EVO X map sensor.

and if you dont have a 96+ TT intake manifold you might need to do something different.

Quote:

---

Originally Posted by 99 vr4

First 100% compatible VR4 ECU is done.... Every circuit is 100%!!!!

Initial testing in my car indicates everything is working... More testing this week.

---

Congrates again Brett. :) I also independently finally fixed the BCS circuit today. :) So... Second 100% compatible VR4 ECU is done... Every circuit is 100%!!!!:)

Quote:

---

Originally Posted by Intropy

Does the conversion harness just change the pinout? (In other words, can I just rewire the 94's harness?)

Does any map sensor work or has to be stock?

---

Greg is getting the gm map sensor to work, i hear... BUt yes you can make your 94 harness work with some pigtails from a 98/99.

I would assume the evo x map sensor is just your standard linear response type right? So as long as the curve is known (easy to test and discover) then anything should work. Just checking that I didn't miss something crazy.

Quote:

---

Originally Posted by aaronatstate

Here is a screen shot of my peripheries with the Chromed rom.

http://i210.photobucket.com/albums/b...eripheries.jpg

---

Here it is again...this is an old post. The 1 is enabled, and the 0 is disabled. Just match up the bits and make them enabled or disabled, and it should.

Here is the latest bits from the latest version of V2.

http://i210.photobucket.com/albums/b...tperiphery.jpg