Jason, you might just install the Arm1 if you don't want any gauges.
Thats about as fine of tuning as the ARC2 needs. Just use some base settings to get started and then tune to your car.
Printable View
Jason, you might just install the Arm1 if you don't want any gauges.
Thats about as fine of tuning as the ARC2 needs. Just use some base settings to get started and then tune to your car.
I currently have a boost gauge in a single pillar pod, wideband/knock into the SM3 on my steering column and boost control/tuning on the eManage which is hidden from view. Turbo timer is also hidden. So you see two things in my car, yet they show a lot of info and both flash to warn me when something is exceeded. I would love to replace the center three with P/H/W oil pressure/water temperature/fuel pressure but at this point in the game I'm good with stock.
If you can use that little box for oil pressure/water temperature/boost then just set warnings for all three, mount it by the radio, and forget about it! Just have wideband out in view and the rest you shouldn't have to constantly monitor but you will be warned if something goes wrong.
Can someone give me a non-moon speak explanation of the oil pressure gauge, and whether or not it will work on the stock Oil Pressure sending unit?
http://i280.photobucket.com/albums/k...GOPR1003-1.jpg
I have two of those SPA gauges. Oil pressure/oil temp and water temp/fuel press. They definitely aren't cheap but they're nice. :)