My LCD screen project, boost, WBO2, Knock, etc

Quote:

---

Originally Posted by RealMcCoy

I think that's a good idea, but IMO it would be more useful if it reset on a new boost event. I'd think something like 5-6 psi would work pretty well.

Another clarification question: I'm going to have to start playing with the temperature DC offset. You have it in 30 deg increments. If I add correction to one increment, I'm correcting from that increment and above correct? For example, if i correct 20 deg at -1, I'm pulling it from between 20 and 50 degrees?

---

Yup, I could change it from 0.6psi to 5psi as the trigger event. However, the tiny boost graph would then be empty between 0 and 4psi.

20F = -1 %
50F = 0 %

So a temperature of 35F would get -0.5% because that's the correct weighted value for that range.

status on the EMS version? itchin' to ditch my gauge pod...

Quote:

---

Originally Posted by vr4 ftw

status on the EMS version? itchin' to ditch my gauge pod...

---

EMS version is done. I'm just waiting for a non-rainy weather day to try it out locally.

Quote:

---

Originally Posted by BlackStealth

Yup, I could change it from 0.6psi to 5psi as the trigger event. However, the tiny boost graph would then be empty between 0 and 4psi.

20F = -1 %
50F = 0 %

So a temperature of 35F would get -0.5% because that's the correct weighted value for that range.

---

Why not just leave peak-boost up until its value is surpassed or explicitly reset by the user? Don't most BC work this way?

Quote:

---

Originally Posted by Simace

Why not just leave peak-boost up until its value is surpassed or explicitly reset by the user? Don't most BC work this way?

---

This!

also would like this to be added to the ems i will be running, nice clean look no gauges bysides my aem wideband. be nice. can i get a pm on some info to contact u about one of these please

Quote:

---

Originally Posted by 93SlugTT

also would like this to be added to the ems i will be running, nice clean look no gauges bysides my aem wideband. be nice. can i get a pm on some info to contact u about one of these please

---

IIRC, this box will also display wideband, so why would you need the WBO2 gauge?

I'll make a new config option for "Automatic peak boost reset=yes/no". This will keep both group of users happy.

As for the AEM EMS version, I've picked 10 popular logging items and the remaining 9 items are user definable -- allowing you to choose whatever AEM EMS allows you to datalog.

^^so it's good to go? i vant vone!

if i don't want this thing to control boost, is it just a matter of not plumbing a vacuum hose to the pressure sensor? i ask because i have my EMS controlling boost.

hmmm i like the sounds of this