So who wants their ECU's "Chromed"?

i think 2.9 is out if that works

hey Greg is there any way you can set it up to prime the fuel pump before the ecu sees a cranking signal?

Quote:

---

Originally Posted by Forest Gump

hey Greg is there any way you can set it up to prime the fuel pump before the ecu sees a cranking signal?

---

That would be cool.

Quote:

---

Originally Posted by Forest Gump

hey Greg is there any way you can set it up to prime the fuel pump before the ecu sees a cranking signal?

---

No. Not with a software mod.

Quote:

---

Originally Posted by Greg E

No. Not with a software mod.

---

Oh, sure you could.

Set up the code to trigger the pump for 2 sec upon completion of certain state1 flags.

Quote:

---

Originally Posted by Jeff V.

Oh, sure you could.

Set up the code to trigger the pump for 2 sec upon completion of certain state1 flags.

---

Something like this would be cool for those who have deleted the fpr hot start solenoid

Quote:

---

Originally Posted by Jeff V.

Oh, sure you could.

Set up the code to trigger the pump for 2 sec upon completion of certain state1 flags.

---

Are you talking about triggering the pump thru the relay in the cab or the one in the engine bay?

Greg,.did you find this yet? MUT A2 bit 1 - Crankshaft sensor pulse MUT A2 bit 4 - Cam sensor pulse

I did find the cam and crank signal bytes some time ago. I will double check if those are the MUT address they are assigned to.

Edit: Yes they are.

Antero sent me a couple extra pins and I wired up my aem uego to pin 93 tonight. It reads fine in evoscan, but do I need to ground the sensor output on the aem to anything?