Baaaaah! you suck Bill!Quote:
Originally Posted by CoopKill
Does the car support them buttons? I saw the heated seat buttons in Box's car. Would like that.Quote:
Originally Posted by Markingtime
Printable View
Baaaaah! you suck Bill!Quote:
Originally Posted by CoopKill
Does the car support them buttons? I saw the heated seat buttons in Box's car. Would like that.Quote:
Originally Posted by Markingtime
Hi Bill,
Been spending most of my time on foriegn Forums looking for the obscure OEM features we never got to add to my car. Just heard about the rare heated seats a month or so ago. Getting pretty good at using Google translate to get the gist of things in their posts. I feel like a world travler without the jet lag, although time zone differences do slow things down.
Mr Lantern,
The short answer is yes, but you need the whole system. Headlight washers need the nozzels that go in the bumper in front of the headlights, and the 1 gal resevoir with pump that mounts to the front crash bar. Heated seats of coarse need the heating elements themselves and I am still trying to get word on if they are just in the seat cushion or also in the back cushion. I intend to have both so I may need a second set of switches depending on the answer. I understand the headlights need the whole EU Spec headlight but may be able to get away with just the adjusting motors. I have a set of motors but have not pulled my headlights yet to see if they will bolt on. Only the high beams are powered up to be adjustable but there is speculation that the same could be done to the lows. I am negotiating for a set of EU headlights that will come with them so I will have enough motors and switches to try and make them all adjustable.
One of the most valuable tips I have for people considering any of these upgrades is to be sure and get the OEM wire harness plugs that go with them that have enough wire attached for splicing. Makes everything much easier.
Washed it.
Sent from my GT-I9300 using Tapatalk 2
I decided to polish out the fuel rails a little more, got my replacement injectors all assembled, & got the last shipment of my parts in from Cherry Hill for the fuel system overhaul U'm doing.
Sent from the garage
Fresh upgrade for my z11 frame.
http://i289.photobucket.com/albums/l...ps0a21fc2a.jpg
http://i289.photobucket.com/albums/l...ps186599f8.jpg
Sweet, make sure that shit welded good! Hire an expert or whatever.Quote:
Originally Posted by Bloodlust182
Swapped out the scored exhaust cam and threw in an old flawless one.
Im having my neighbor weld it in, he taught a welding class at a technical school for 20+ years. Should be dam fine welds.Quote:
Originally Posted by green-lantern
Meanwhile the welds on my "3S" I did tonight looked like Ray Charles did them with a harbor freight welder.
What did you do chris? Btw when did you say you needed that hoist back by?