So who wants their ECU's "Chromed"?

Quote:

---

Originally Posted by fridayda13th

Can you rehost the file I was trying to download it and test it out when I get my 98sl ecu in. My cable is on the way from blackstealth(Great guy helped me alot)

---

Rehosted for you man!

Quote:

---

Originally Posted by Greg E

Another very expensive but more than worth while investment for this setup is a brand new Mitsubishi Throttle Body. That alone will make your car run stock smooth....or at least a remaned one with new seals, IAC and FIAV.

---

I'm a big DIY'er and already have a quality set of seals plus OEM gaskets so if I don't get it to seal up on the first shot I will try it again. I found a few different sources for the seals so I'm sure I can come up with what I need to get it to work. I'd rather upgrade the throttle body than go new but it all comes down to whether or not the rebuild works out. If not I may be shelling out the cash for a plenum and Q45 tb. :(

Has any of the 91-95 guys used one of the EVO MAP adapters for DSM's? This seems like a nice easy solution for us.

http://www.jmfabrications.com/store/...97966_zoom.jpg
http://www.jmfabrications.com/store/...83896_zoom.jpg

2G/EVO MAP Sensor Adapter - JM Fabrications

Quote:

---

Originally Posted by Greg E

Another very expensive but more than worth while investment for this setup is a brand new Mitsubishi Throttle Body. That alone will make your car run stock smooth....or at least a remaned one with new seals, IAC and FIAV.

---

I do have new seals from STM and a new IAC. Do the FIAV's go bad often? mine seems to work as the cold idle is higher than warm.

Quote:

---

Originally Posted by Monster Stealth

Has any of the 91-95 guys used one of the EVO MAP adapters for DSM's? This seems like a nice easy solution for us.

http://www.jmfabrications.com/store/...97966_zoom.jpg

2G/EVO MAP Sensor Adapter - JM Fabrications

---

That's for running a different map sensor in place of the stock one. won't be of any use to the 91-95 guys since there isn't a map sensor slot on the plenum.

Quote:

---

Originally Posted by Greg E

That's for running a different map sensor in place of the stock one. won't be of any use to the 91-95 guys since there isn't a map sensor slot on the plenum.

---

I was under the impression that it is what they use to run the OE EVO X map sensor since they do not have a spot for it either.

Example

Here is an example of the one you are thinking of I believe.

STM: INTAKE MANIFOLD SENSOR ADAPTER | 95-99 DSM | EVO VIII-IX

I know where to get a couple 98 sl ecu's I had to pay for the info so when I get home I'm going to post up the info for all to see lol its not a secret just numbers where to order. And greg thank you very much for rehosting that I was looking it over last night great work its a lot of info to take in.

Quote:

---

Originally Posted by Monster Stealth

I was under the impression that it is what they use to run the OE EVO X map sensor since they do not have a spot for it either.

Example

Here is an example of the one you are thinking of I believe.

STM: INTAKE MANIFOLD SENSOR ADAPTER | 95-99 DSM | EVO VIII-IX

---

Gotcha. Yep, that's what I was thinking of!

Quote:

---

Originally Posted by Forest Gump

I do have new seals from STM and a new IAC. Do the FIAV's go bad often? mine seems to work as the cold idle is higher than warm.

---

Pop off the coolant hoses to your TB. if you see a coating of calcium and rust, its probably built up in the FIAV too.

it looked pretty clean when I had it off during the rebuild. thanks though