My LCD screen project, boost, WBO2, Knock, etc

Quote:

---

Originally Posted by Alan92RTTT

Is HHH a free download?

---

Free download to play with but costs $40 to register:
Hand Held Halo Serial OBDI Datalogger - Free software downloads and software reviews - CNET Download.com

Quote:

---

Originally Posted by BlackStealth

Thank God datalogging is working! It was very frustrating to get it to work correctly.

Success! I can now datalog my device using HHH in high speed mode (57.6K), and also datalog two new custom parameters WBO2 and Boost simultaneously. This finally solves the age old problem of not being able to log both. As you may have noticed, I'm using the OBD1 version of HHH for my 99 ECU :)

---

That’s great news! Will mine need updating?

Quote:

---

Originally Posted by green-lantern

That’s great news! Will mine need updating?

---

Yes all units will need updating (reflashing). It's an easy process, all you need is a null-modem serial cable (about $2 on ebay) and a computer to reflash the device.

I'll release the firmware on http://www.lcdboostcontroller.com later today.

Awesome work!

I'm ready as soon as you are. :)

-John

Quote:

---

Originally Posted by BlackStealth

Yes all units will need updating (reflashing). It's an easy process, all you need is a null-modem serial cable (about $2 on ebay) and a computer to reflash the device.

I'll release the firmware on http://www.lcdboostcontroller.com later today.

---

OK thanks

I see some slightly different types of cables. Would I need male to female, male to male, female to female, Male to USB, ect?

I had an idea the other night.

Valet mode. One setting normal/valet. In valet boost will be kept to a max of wastegate.

Good thought Alan

Quote:

---

Originally Posted by Alan92RTTT

I had an idea the other night.

Valet mode. One setting normal/valet. In valet boost will be kept to a max of wastegate.

---

That’s a pretty good idea, you could always just turn the duty cycle down but that would be a bit more hassle (you have to spin the knob quite a bit) and remember what you had it set at.

I don’t think I would let a Valet drive it though. lol

For those of us with EvoScan; is EvoScan supported?

Valet mode would be better if you could control rpms. For example, with my ignition cut WOTbox, if I was to let someone else drive the car I would set the max rev limiter to 3000 rpms. It's gonna be a pain in the ass to hot rod when you hit ignition cut as soon as you get full boost.