Pulling the front bumper for some cosmetic enhancements
Printable View
Pulling the front bumper for some cosmetic enhancements
Sold the Stealth. Only one garage queen now, lol.
Had to say dog huh? lolQuote:
Originally Posted by n2nsanity
I think a dog really did take a bite out of mine.
Finally virtually finished my racing seat/harness install. All I'm missing is a good way to restrain the shoulder straps on the roll bar (they can slide side to side and the bar isn't far enough behind my seat to cross them). I bought some 1.75" clamp-on brackets designed for ballast, but I think they'll work well. When I need to add another point to the bar, I'll weld on loops.
Also paid maximal for my custom high flow cat :) It's pretty funny looking, but it's the most cost effective way to put a cat designed for gasoline in my 4" exhaust.
http://i26.photobucket.com/albums/c1...804_132756.jpg
Lol, that does look funny
Post via Tapatalk
did the ac delete and drove it today. Finally
Changed plugs and wires
I started draining the tank on my stealth preparing to put 91 back in to see if the misfire goes away. Because that took so long I started assembling together my new engine hoist which turned into a pull the motor and transmission out of the VR-4. :p I just need to pull the rear diff and I'll have all the parts out I need for the 5-speed swap.
I've got the rest of the month to pull the 6-speed and motor while I'm in there, check bearings and oil pump, install Devastators, and swap the 5-speed drivetrain in. Hopefully come the end of the month I'll be ready for the track.
I got my interior floor pans hatch and area behind the bumper painted black, finally. The whole car is soon to be black.
Drove it and out new front brakes and fixed the rust underneath.
Sent from my iPhone using Tapatalk