Printable View
well, what do you want for them? my funds are limited for the meet as i'm already signed up to spend 140.
where'd you have these made? or where'd you get them? gotta link?
i'd trade you a 4 bolt block, a front diff, cams, or a forged crank plus a little cash from you for the mounts. pm me! completely negotiable. that's pretty much all i have that i'm interested in bringing to the gathering. and the block would probably be a bit of a beetch.
let me know, i'll probably want those mounts
_isiah
iono, maybe $75 for the mounts
what kind of cams do you have? i have 2 or 3 sets of stock n/a cams already
i don't really need much right now
have my hands full with all the crap i have already
i will post up my wishlist tho
the cams are tt cams from four bolt heads.
i'll give you cams for the motor mounts, or cams and that front diff if you're interested. let me know though, so i can put something in my car.
tanks!
_isiah
lsd? i have a 92 mtx in now, so probably can't use it. don't think any were made for 91,92
don't think i need the cams
here's some things from my wishlist
9 or 10mm plug wires
ground wire kit
fuel pump hotwire kit
anodized/polished fuel rails
fuel pressure regulator
aftermarket or maybe new oem fuel filter
hiflow cat
blue led interior light kit
gloss black powdercoated valve covers
gloss black powdercoated or polished plenum
shortshifter
new shocks
new ceramic brake pads
drilled/slotted rotors
braided ss brake lines
rebuilt/gloss black powdercoated calipers
silicone radiator hoses
new oem or aftermarket suspension bushings
engine bolt dress up kit
99 front bumper
fiberglass deft top secret hood/evil eyes
10" sub
no, it's the front diff from a twin turbo 25 spline tranny
http://i144.photobucket.com/albums/r...s/S5002788.jpg
if your 92 is tt, you can use it for sure. hammm, well i'd sure like those mounts. anything else you'd want? lets see this list.
_isiah
i've got a very pretty 10 inch jl w1v2 that i recently put back in my car. i don't really plan on keeping it, at least not in that box, so i might consider trading that for the mounts
and i've got a no name fpr, but i think i should figure out how to make that work.
Anyone have everything for a Gen1 TT brake conversion?
i've got a front caliper that needs to be rebuilt.
_isiah
For a 1993 VR4, I need a driver's side tail light, active exhaust switch, one chrome exhaust tip and an ETAC module. At least that is what I am told is what is needed. The headlights do not go up and down and the ETAC module is what I was told was causing them to be non-functional.