Hey Bill,
Just to clarify, can we access rear spark plugs without removing the plenum?
Printable View
Hey Bill,
Just to clarify, can we access rear spark plugs without removing the plenum?
Absolutely NOT! Keeping the runners OEM length prevents access.Quote:
Originally Posted by zel-man
New info added to first 2 posts.
Repost with new option list posted. I will need to know the specifics of the TB. You are supplying flange?Quote:
Originally Posted by J. Fast
If you shorten runners will the plenum still clear rear valve cover? The DR mani needs a spacer between lower and upper to clear.
Will have to look into it when I get one at least mocked up.Quote:
Originally Posted by familyMAN
so a 70MM opening is an option?
Is the q45 tb plug and play as far as the throttle cable and sensors are concerned?
YesQuote:
Originally Posted by DuTTch
As mentioned in the first post, no concerning the throttle cable. You may need to mess with the mounting of the cable especially if going drivers side. The passenger side (OEM side) May have a mount on the rear added. Need to explore this more once I can get my car to him.Quote:
Originally Posted by NOMIEZVR4
The TPS I am unsure of. Need to research maybe thru Greg.
So I get this much, the q45 only fits on the plenum...but as far as working with the electronics of the car, the TPS, IAC, coolant lines that go to the stock TB, all of that is DIY? T
Almost any throttle body an be mated up, just need the details to have the correct flange welded on.
The TPS will need to be wired in, and the coolant lines, AIC will need attention, yes.