You got it.
Still need to see that log to verify something's.
Printable View
You got it.
Still need to see that log to verify something's.
Sure, no problem. I'll have the comparison posted this Saturday.
Greg, I got the setup file, thank you. Now I am not sure how to use it though. I have it saved in "saved settings" and I am quite sure that is wrong. Also the setup file says its for MUTII and I use the MMC 1G 16 pin connection. I am pretty new to logging so any help would be appreciated.
Sorry for the mini hijack MB3000.
First post of this thread goes thru how to set it up.
http://www.3sgto.org/tuning-engine-e...flash-ecu.html
Thanks buddy.
Couple of questions that I have that I haven't seen answered anywhere else, the actual flashing of the ECU. I have the Tactrix 2.0 cable, as well as their "Mitsubishi Re-flash Connector" and the "Flash plug & lead wire" that was included with my Jester '94-97 ECU purchase. Obviously the Tactrix plugs into the OBD2 port, but what about the flash connector(s)?
I think I answered my own question. Jack plugs into the Tactrix unit which plugs into the "Mitsubishi flash" adapter that came with it, which plugs into the Jester connector which is wired directly into the ECU via Pin 57. This sound right?
Greg, would you like a datalog of the FECU before or after being flashed with the disable peripheries, VE table, etc..
After.
Before I go flashing the ECU, is what I posted in post #27 correct?