:dontknow2: Used it for my whole system, just trimmed up the edges after the initial cut.
Printable View
:dontknow2: Used it for my whole system, just trimmed up the edges after the initial cut.
I suppose that would work but when I used my shears the braids also flowered out and away from the inner tubing, making proper installation impossible.Quote:
Originally Posted by mb3000
Must be something in the SC air :lol:Quote:
Originally Posted by BigTyla
Interesting. I've always wrapped the ends with electrical tape and used a dremel cutoff wheel, never had any problems with fraying that way.
Jumped the car a couple of days ago and it started up smooth as butter. The turbo was still smoking slightly but not as much as it was before. I think it just needs to burn off the excess oil that leaked into places it shouldn't have. Regardless, I don't expect this thing to last forever anyway. Ebay 16Gs do not have a reputation for longevity, but I won't complain since the previous owner threw it in with the car for free. :D When this thing gives up the ghost I'll either send it out for a proper rebuild/balance or buy an Evo III Big 16G for a couple hundred more.
Nice. This thread needs more pics.
Yes, I agree. I'm waiting until I can get the car out of the garage to take some pics that would do it justice. Gotta put that new Canon Rebel T3 to use!Quote:
Originally Posted by AdamVR4
Got the bumper and turn signal lenses on tonight. Having a hard time aligning the front bumper properly. It's hanging down a little bit and it's driving me crazy.
One of the bulbs in the turn signal lens is out so I need to replace it. Started to put the downpipe on but I'm going to wait and try to start the car again and let it run long enough to see if I can burn all that oil residue in the turbo or confirm that it is blown with 0 miles on it. :p
Would like to get the brakes bled in the next couple of days before I go out of town for 10 days for Christmas/New Year's. Will see if I can entice a friend with beer and cookies.
http://s3.amazonaws.com/kym-assets/p...PNG?1307468855Quote:
Originally Posted by BigTyla