Printable View
Update
10/4/10
http://img840.imageshack.us/img840/2608/photo1sn.jpg
Fits perfect added a Twin Turbo Logo. I haven't installed it yet but you will drill a hole and add this mount, which I will provide.
http://www.ted-kyte.com/3D/Pictures/...ly%20Screw.jpg
With an added option the whole will have CF backing like this.
http://img405.imageshack.us/img405/7439/photoal.jpg
That looks nice!...They definitely need backing though. :) At least I wouldn't get mine without it.
the backing came in today from my vendor, I am very impressed with this quality. It is dry black carbon fiber and you can feel the texture.
http://img178.imageshack.us/img178/231/photo1mx.jpg
Ok so in my case, where the door material itself seems to be falling apart near the screw holes, this would be perfect. BUT, will it interfere with normal removal of the door panel itself? I seem to take mine off frequently. My window keeps getting broken. I wish they made polycarbonate replacements. Also, can you make a set with no writing on them?
You do not need to remove your door panel to install these. Pretty much you drill a hole into your door big enough for the toggle screw to get in. You put the bolt through the piece and you put the toggle on the other side of the bolt. You then close the toggle and snap it in where you just drilled and screw the bolts in. If you need to remove your door you simply unscrew the bolts and the toggle will fall on this inside but you would take the door panel off as normally and just retrieve the toggle and install it back again as normal.
I plan on making a set with out a logo.
Oh I just saw the picture. Those look like standard butterfly anchors. Will you continue to have the CF inlay? Do you have a price estimate including the inlay?
I am looking at an added 20 dollars for the Carbon fiber. You can feel the texture/quality and it looks amazing. Pictures don't do justice until you see for your self. I will be sure to get installed pictures tonight.
MSRP pricing will be
80 for no logo
100 for logo
Add 20 for CF.
I'd jump on these
only interested if you can do "G T O" in anodized black polished aluminum. i refuse to have anything silver anywhere but my engine bay.
I'm in for the twin turbo with carbon fiber.
Are you pre-installing the CF? I want to paint the trim body color, so the cf will be an issue if pre-installed.
I also want the upper section as well that were in your friends car, which I want to say VR4.
Edit: Make it happen!
I have pictures off my phone but the quality of the picture is just not there. The Carbon fiber does not come installed. I will include it in the package, remember this is CF vinyl but it looks like real CF with the same texture, none of this fake crap. I want to say it is real carbon fiber with 3M adhesive. So you will see it stickied on some cardboard or abs plastic and you would have to super glue it to the piece yourself. This stuff is expensive and I am not making much from it, just enough to cover materials.
http://img17.imageshack.us/img17/2279/photo9ul.jpg
http://img808.imageshack.us/img808/5484/photo8x.jpg
The hardware I used to install made this thing a headache to install so...back to the drawing board! I used toggle screws and the ones I had were to long so they would not expand once inserted. I need to find some smaller ones.
Ill take a set that says 3000GT without carbon fiber :D. (when your finished). I want red inserts :).
And I want shifter trim, upper trim, and speaker trim when you get around to those :D. These look awesome.
I don't have any red inlays. :(Quote:
Originally Posted by terrets
You can actually spray paint plexis glass with an even coat of red and super glue it on, I think it would look really good.
For the CF, they will not come glued on as that is up to you guys to do. I used simple super glue and just did the edges and came out really good, just be careful with it.
The CF will be precut and layed on cardboard ready to be glued on.
Ohk thats fine. Thats a good idea with the plexi. I bet it would look great! Im in no hurry for these cause my car sits over winter. So take all the time you need :).
I'll take a set. I have the microsuede material I did my headliner in so I can replace the CF with that. Is ther any plans for the shifter trim and other parts?
I have non logo door trims with out hardware currently for $60. + Shipping Let me know if you guys are interested, send me a pm.
How about alligator anchors?Quote:
Originally Posted by Atrosity
SO the update is I am revising my drawing so these will screw into the stock location and that there is no modifications needed at all.
sahweeet!
Estimated time to go on sale. ~1.5 weeks.
Wooo! :D I want VR-4 ones :D
I like the idea of having these anodized...say...black?
I'd be interested in a black one. :)
Provided I can source some true black door panels for my (hopeful) interior conversion, I would totally get these. Subscribed for the future.
this. totally this. and it needs to say "GTO" in stealth lettering.Quote:
Originally Posted by akotten
Why the Stealth font? Why not the same font that was used?
because stealth font is the best looking out of all three. hands down.
fair enough