Printable View
good news is sinsvr4 is trying his best to help me out, hes short on cash and cant just refund me right away but im willing to work with him because i know what its like to be in a shitty situation.
Bad news i still havnt decided on a kit yet its a toss up between the whole kit forest suggested on ebay or the two i posted...
Ya sinsvr4 is a good guy, I'm sure you'll get things worked out.
I personally wouldn't run a 6 puck until it you had to.
Look around for an rps pressure plate. I'm not sure if they sell them separately or not but I've heard rps pp with oem disc is great for that powwr level. If not I believe I still have an ACT pp and Centerforce pp laying around somewhere that I can check for warping beforehand if you'd be interested
*EDIT* sending you a PM, ACT is a tiny bit warped, but Centerforce is near perfect. Looks like it was only used for a few miles actually lol
sorry guys had some military things to take care of and couldn't get online. Im checking Pm's now
ohh and basically even if i got one of those ebay listed i posted, If I got an oem disk I think I would still be saving money going new as the whole kit is $240. I just wasnt sure if anyone had used one before or just know from somewhere that its either garbage or works fine.
Southbend has been solid in my experience. I ordered direct from them.
Lots of guys seem to like Southbend, mine only lasted me ~1k miles before the springs popped out. I had the stg3 ofe and loved it up until all the springs popped out :sad: I never launched on it at all either and never really romped on it ever. I don't think the car ever saw past 12psi with the 15g's before the clutch went out. I don't know if it's a case of Southbend quality control, or if it's just sprung hub discs in general, all I know is, I've seen way too many springs pop out in my dayQuote:
Originally Posted by VR-4 0wnz j00
I wanted to give a huge thanks to mh3kgt for the perfect centerforce pressure plate he sold me for a great great price saving me money on my budget and keeping in contact with me the whole time. Very informative and when he told me barely used he wasn't joking, this thing is damn near brand new and my straight edge shows it (cant see any light on any side) So along with a new oem disk, this and the new TOB from sinsvr4 all i need is the alignment tool and all new fluids and I'm good to go. Advance auto doesn't carry the tool btw not sure where to get one around here now since they are main store in my area besides Napa so ill call them.
Edit: Napa is a no go too :(
Yeah the Oreilley's here said they had one, and let me borrow the alignment tool, but it wasn't even close. I had to improvise and wrap it in electrical tape to get it to be a snug enough fit in the splines to even work correctly. Napa should probably be a safe bet tho. If not may have to try a Mitsu dealer...
*edit* Oh, and glad you were happy with the pressure plate and can make good use for it. Pretty much forgot it was sitting in a box under the spare bed until I really thought about it and saw that you needed one after your mishap with the other PP. Now turn up the boost and let her rip
Ugh the dealer is the last person Ill call haha they are terrible here.
Edit: holy cow... the dealer cant even get them wtf!
Yeah same here, well I believe 3sx and a few other vendors should have the alignment tool for sure.
isn't it a 1" 23 spline tool, try autozone.
as far as I know it is the same as the evo:
http://www.streettunedmotorsports.co...nment_tool.htm
I called every part store around, dealer, specialty tool shops and none have it. The dealer has one for themselves but won't loan them out. So I'm trying to find the right one online. I keep finding non turbo ones though (doesn't clarify awd) only place I know for sure is 3sx at 26 shipped 13 for tool 13 for shipping...
The link you posted woukd be amazing $9 shipped if it will work. Anyone know for sure?
PM Austin at STM, he would know for sure.
What forum? There is like 10 of them.
He's on here as well as the other site. Go to the STM section under vendors, it'll be easy to track him down there...
Austin said yeah I just have to select the 3s one, told me its what he used.
Ordered one from them, Thanks again forest saving the day as usual. and thanks mh3kgt for the contact idea to make sure.Quote:
Originally Posted by Forest Gump
Get a new ruler first.. That thing looks like it was beat on a damn curb... Then relay it...Quote:
Originally Posted by Vince86
You can't test with a ruler, it doesn't work like that.
bro, i dont sell shitty stuff. I have a 40 positive rep on 3si and seriously you checked to see if it was flat with a metal ruler that looks like you ran over it 30 times. Then you sanded the PP and now its not flat? wtf? the PP was perfect. 4k on it isnt bad and u still sanded the pp? so you have perfectly even strokes to ENSURE it is even? wtf is that? pisses me off that shit like this happens.
Rulers are NOT permitted!!!
How does that ruler stand up on it's own? Was David Blaine there to help with that?
seriously, im kinda at a loss for words, you use a welding tool ruller to measure and you "SANDED IT"? Y didnt you get it resurfaced? it can cost what $40 bucks? But, it wasnt warped. And what r clutches supposed to look like after 4k of use? perfectly shiney? really? you ever look at a used PP after you pull it off? I have and they all look alot worst than that btw. I tried to help him with other things that he could use or sell, and he didnt want them. cash is gonna be a no go. And the only reason im not verified here is becasue i was too lazy to get alan a picture of my personal shit..
Why would you take pictures of your shit?? Kinda weird.. I think they have a name for thatQuote:
Originally Posted by Sin'sVr4
lol. you silly bastard!! yes i take pics of my shit...only the long ones that curl in the bowl
I love beautiful big tits... Ones that are perky and round.. That bounce and taunt you.. Then ones with perfect nipples that just becon for you to suck and bit......
Those ones are the best, they're like a feat.Quote:
Originally Posted by Sin'sVr4
Shit wrong thread
Ever had green ones ?? Just sayin!Quote:
Originally Posted by J_Parker
You're looking for the boobie thread, this is the poop thread now.Quote:
Originally Posted by Boomer3000
Dude, I ate some Chinese food stuff a while ago, and I had like green leopard looking shit in my shit.Quote:
Originally Posted by Boomer3000
oh... I take poops all the time.. perfect.. But we need boobies here as well
really?Quote:
Originally Posted by tt4me
omg lol i gotta pee now im laughing so hard
i smell bullshit here. thinking about this you sanded it and now its not straight what the?
.......
Holy shit