Printable View
i think the piece in question is for rad sroud. I'm also finally doing my 99 bumper correctly and it's looking like I'm not going to be able to use that piece with FMIC.
Wish I would have known this before I ordered it :(
Still interested if anyone can correct me.
and no those other pieces aren't on the 99, the 94 bumper i just yanked has them, the 99 is diff with the under plastics / air dam extension
So to follow up on this. I actually found the little push pin pieces that attach the lower sides of the 99 bumper to the stock lip & splash shields. They are little phillips head push pin screws (like in the wheel whell area). They came in a little baggie with my 99 bumper (i bought it new). For PN MR447764, this is needed to attach the lower center of the 99 bumper to the center of the stock lip & splash shields. I had to trim the top tabs off of it to get my oohnoo dual core Intercooler to fit with some clearance. I just cut it flush so it nessles inside the bottom of the bumper. The top tabs tabs and holes in question were for the stock 99 plastic ducting (which i later found in the ASA/caps program).
I hope this helps someone in the future.