How much massaging did the 74 injector harness cover need to fit?
Jason
Printable View
How much massaging did the 74 injector harness cover need to fit?
Jason
Worked on rear brakes for about the 5th time, still squeak..... Anti rattle clips are falling off, have lost both in the last week and a half, no clue whats going on :/
Next step is to get rotors turned, milled the pads flat yesterday, they are square but I think the glazed material is still in the iron, gotta take .005-.010" to get back to fresh metal.
Not to much really.... I had to cut off the drivers side a bit as The mount hole on the panel does not exist. so I tried to follow the lines of the inter-cooler piping. The coolant cap is the most that has top be cut really. You don't really have to cut it out, but it prevents you from taking off the cap to check the coolant. I am still working on getting the coolant cap cut-out to work. I need to smooth out the cut out part more as it looks too rough right now. I might end up making it two pieces over by the coolant cap, the one covering the injectors and the one covering the 3-connectors.....Quote:
Originally Posted by JasonY
She's done!
http://s788.photobucket.com/albums/y...030512_001.mp4
I'm going to rape the shit out of it!
The slave cylinder bores are different sizes. A smaller 11/16" for the AWD & 3/4" bore for FWD.Quote:
Originally Posted by green-lantern
I'm using a FWD master but it's an AWD transmission/clutch. You think I should stick with the FWD slave or would I gain anything from using a AWD slave?Quote:
Originally Posted by Primus101
you can use either one. The bore is larger in the FWD one so the clutch pedal will fill slightly lighter and you'll have a tad more travel on the pedal to move the clutch the same amount.Quote:
Originally Posted by green-lantern
I'm running the FWD slave to lighten the clutch pedal a little bit.
That's what I wanted to know. With the on/off switch in my spec 4+ it wouldn't hurt to have a little more travel.Quote:
Originally Posted by Forest Gump
im using a autozone one too. Its got a blue blody where the awd one is gray i think.
What's a blody? :p ;)Quote:
Originally Posted by Sin'sVr4
My new $20 anti surge tube. At times I sure love me some Ebay.
http://i123.photobucket.com/albums/o...n/DSCF9036.jpg