Niiiiiice! Waiting on the last round of parts/fluids/clamps/gaskets/etc to arrive to get mine fired up.
Printable View
Niiiiiice! Waiting on the last round of parts/fluids/clamps/gaskets/etc to arrive to get mine fired up.
Moved the project Stealth outside and put the VR4 in the back of the garage for the Winter. Snow is here!
Watched it get covered with two feet of snow... FML
put in new/used door panels and replaced outside lower door window seals
Quote:
Originally Posted by Boomer3000
5mm Spacers + healthy drop and that would look soo sick.
Prepping the car to run at Rockingham Dragstrip tomorrow for the first time: HorsepowerJunkies.com
Got an alignment,
Checked and topped off all of the fluids including Trans/TC,
Checked steering and drivetrain for anything loose,
Attached the passenger seat belt :P,
Finished the battery hold down bracket,
Adjusted the shifter so I can finally shift smoothly without grinding...LOL,
Mixed up a gallon of 50/50 boost juice.
Going to be a long day tomorrow and hopefully a good one!!!
Car is actually already lowered.. the jack is still under it in the front.. And no spacers.. The staggered look or whatever people do to make the wheels stick out past the fender, imho is not god looking at all.Quote:
Originally Posted by Blackmount
I meant spacers all the way around.. bring wheels out so they are flush with the fenders 5mm should be just enough that it wont make the wheels poke out. Nice and flush.
Had it checked for an exhaust leak. Turns out I don't have one, always good news.
Walked past it. Waiting for good weather so I can fix my coil pack connector and install my new speakers. I'm also tempted to buy a new coil pack. It'll be one of those "while I'm in there..." purchases.