What size is the bolt that holds the seat bracket into the floor?
Printable View
What size is the bolt that holds the seat bracket into the floor?
ASA says MU240135 which is 10x30. Pretty sure it takes a 17mm socket.
M10x30... it's probably either 1.25 or 1.5 pitch
if you need to pick up bolts, go to ace and pick up studs instead. it makes it much easier to drop the corbeau onto if you are still using the rear studs for your harness. Don't have to worry about aligning to bolt everything up, and you can stack washers onto the rear-inside stud to account for the jank bracket. The slider will work more smoothly when you don't crank down on the bracket to force it on.
It's an odd thread pitch. IIRC 1.5