I want this plenum... anyone know who made it?

Under the "Suspension Adjustment" picture tab in this link you can see a pic of a really badass 6G75 Drivers Side Plenum and throttle body.

http://www.blackheartmotors.net/events/


Here's a better angle in this vid... http://www.youtube.com/watch?v=Q8KPP...eature=related


Anyone know this guy or heard of who builds that plenum?

Never heard of those people, but that doesn't look very difficult to make.

Jeremy

I don't know about you but I can't do that kind of work. Looks to me like the plenum is reversable. You can rotate it to feed from the drivers side or the passenger side. Look at the tank design and the bolt pattern from the risers to the plenum. Instead of it being a standard one piece plenum it's a two piece. The runners can be separated from both the velocity stacks and to the plenum. That design is badass.

That Galant is dammmnnn sexy.

Why dont you email them and ask?

Quote:

---

Originally Posted by J. Fast

I don't know about you but I can't do that kind of work. Looks to me like the plenum is reversable. You can rotate it to feed from the drivers side or the passenger side. Look at the tank design and the bolt pattern from the risers to the plenum. Instead of it being a standard one piece plenum it's a two piece. The runners can be separated from both the velocity stacks and to the plenum. That design is badass.

---

It's a ported stock (XG350) lower runners with a fabricated upper plenum, pretty basic. I can tell you from the bolt pattern the plenum is not reversible, IIRC the upper does not have a symetrical bolt pattern, though I could be wrong, been a long time since this was debated. Has 10" runners vs the 12" of the mivec upper, and I think ours. From the pics, I see the upper he uses looks like it was cut from the EBAY manifold Erron has or similar, then welded to a plate to bolt to the runners. I'd personally just would have used D channel or cut 4" tube depending on how you'd want to do the stacks.

Anyways, he's on galanttuners.com. Everything you'd need to know is there. Screenname SPD_FRK.

Maybe the lower part of a stock plenum & custom upper piece, all polished up to match?

Bam, asked and got the answer... They are $400 if we do a group buy :Clap:

And... they are reversable

Online Store - Xcessive Manufacturing

Best looking aftermarket plenum for 1/2 the price of others. I'm impressed.

I was looking at the BHJ like Erron's but $1000... seriously, that's absolutely ridiculious!

noice. surprised they said it's reversible because they said they'd need the lower to make the angled lower holes...