Sway Bars On SALE!!! Both AWD & FWD

Printable View

11-09-2011, 05:14 PM
SUTHNR

Sway Bars On SALE!!! Both AWD & FWD

We have changed up the sales and how have both the AWD and FWD sway bars on sale!!

http://www.3sx.com/banners/bannerad.gif

AWD: 3SX / Addco Sway Bars - AWD 3000GT VR4 & Stealth Twin Turbo

FWD: 3SX / Addco Sway Bars - FWD 3000GT & Stealth Non-Turbo

Limted time!!
The 3SX Crew
11-09-2011, 05:29 PM
AdamVR4

Wasn't interested in the sway bars, but you got me to look around your site and forward a couple gift ideas to the family ;)
11-09-2011, 09:04 PM
Greg E

Hmmm... I got a promo code to use....
11-10-2011, 08:50 AM
DrGonzo

Can someone explain the benefits of the AWD bar?? Besides the different end-links it looks just like the stock one which I think is the same thickness.

Definitely see the need for this on the FWD as that swap bar is super thin.
11-10-2011, 04:18 PM
DocWalt

Quote:

Originally Posted by DrGonzo

Can someone explain the benefits of the AWD bar?? Besides the different end-links it looks just like the stock one which I think is the same thickness.

Definitely see the need for this on the FWD as that swap bar is super thin.

There's not really a whole lot of benefit to the front bar alone, but the rear bar alone may make the car a bit more tail happy than necessary. If I was going to purchase I'd probably buy the pair.
11-10-2011, 06:54 PM
anyonebutme

Quote:

Originally Posted by DrGonzo

Can someone explain the benefits of the AWD bar?? Besides the different end-links it looks just like the stock one which I think is the same thickness.

Definitely see the need for this on the FWD as that swap bar is super thin.

NOT the same thickness. 238% stiffer to be exact in front. Both bars, when installed, err on the understeer side when installed like stock, this can help some setups. For a more neutral setup, the front bar can be "softened" by installing it to the outside of the control arm mounts, but can cause massive oversteer in certain transitions.
11-10-2011, 10:33 PM
DanEboy5

Anybody have a set on their TT w/ a set of Megans? I am thinking about buying the set and doing the AWS delete as well.
11-11-2011, 08:42 AM
DrGonzo

Quote:

Originally Posted by anyonebutme

NOT the same thickness. 238% stiffer to be exact in front. Both bars, when installed, err on the understeer side when installed like stock, this can help some setups. For a more neutral setup, the front bar can be "softened" by installing it to the outside of the control arm mounts, but can cause massive oversteer in certain transitions.

Good to know..

I knew the front was thicker but the rear one looked to be the same. "Meant to say the rear one in my initial question".