1995 Yellow VR4 Billet GZP747 Build

We got this from car Hellbringer quite a few months back, after this whole to-do (long story). Drove down to NC and trailered it home. I think this was back in September...?? Maybe early October... something like that.

Anyway, it's been sitting in a corner ever since with a blown engine and blown turbos (which were a bit of a surprise, but, we weren't expecting a gem). We ran into some title issues, because the company that re-po'd the car, never actually applied for a title :rolleyes:

I have FINALLY been able to track down a company that can get a title for me :Clap: So... we began the tear down.

We knew it had a whole bunch of modifications:

3SX Executioners (we aren't 100% sure that's what they are)
Stillen DP
JIC EXhaust
Greddy Emanage Blue
Arc2
Granitelli (spelling??) MAS
Greddy E01 Boost Controller
RPS Clutch
680cc injectors
I believe a Walbro Fuel Pump.

So... we pulled the cylinder heads off... and lo-and-behold, forged pistons :laugh: That was a pleasant surprise for sure! We're pulling the guts apart to see what else is in there (maybe some forged rods?!) So, we'll be rebuilding this engine when time allows.

Pictures to follow as we progress with the tear down and rebuild :)

http://i34.photobucket.com/albums/d1...4/IMG_6154.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6160.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6159.jpg

Interested in selling the arc2 or possibly doing a trade for my Maftpro....kind of considering ditching my Speed Density setup and going back to Arc2 until I learn to tune better. PM me if we can work something out

We'll be putting the arc2 back in to the car with the new set-up. Nothing out of it is currently for sale.

I would love to see what you guys end up doing with this car. I have almost the same parts on mine!

:D Been watching this car from day 1. Glad it ended up in good hands.

Yea, it ended up being a lot more work than we initially thought. Fortunately though, we were planning on doing a build... this just gave us an excuse to do a little BIGGER of a build... :suspect:

even on the lift it has stock wheel gap. :D

Engine is starting to come together :)

http://i34.photobucket.com/albums/d1...4/IMG_6163.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6164.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6165.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6180.jpg

http://i34.photobucket.com/albums/d1...4/IMG_6181.jpg

Paint that red fuel rail loop. :D

Mmmm, yellow VR4....

I remember seeing this car long time ago on 3si for sale. Nice project choice though... For some reason I love the factory yellow. You just plan on rebuilding the executioners or what?