sl 3.0 vrs vr4 3.0 engine?

Does anyone know the difference between the sl 3.0 v6 vrs the vr4? Have a sl motor and vr4 looking what i can keep off the sl for the vr4 motor?

So you're wanting to keep parts from the SL for the VR4 motor?

Crank, pistons, rods, are all different. Bracketry should be the same. I wouldn't be surprised if power steering/alternator/AC are the same. Coils might be the same. Outside of that, I can't think of anything that would even make sense for you to keep? What's the goal here? Just to have extra stuff?

For the short block, only the rods are the same. Pistons, crank and block are different. Heads are different. Lifters, springs and lash adjusters are the same. Cams are different.

Alt, AC and PS pump are the same, PS reservoir is different.
Coils, PTU are the same.
Coolant neck is different
Rear and DS motor mount are the same. Front is different.

Yes just for spare parts have to rebuild the vr4 motor also....

93+ cranks are the same forged.

Sent from my SM-G920V using Tapatalk

I got interrupted by actual work earlier, so my half typed response got delayed... Forest answered in the meantime.

Crankshafts are the same.... Cast for 91-92 all models, forged steel 93-up all models. Turbo models all had an alignment pin for the flywheel that would need to be pressed into one that was originally an N/A crank. (if you want it to be OE correct.)

Didn't know cranks were the same! Really thought the SL cranks were weaker

The blocks are different???

Quote:

---

Originally Posted by CoopKill

The blocks are different???

---

As far as major components, the only things in them that ARE the same are crank, rods, and intake cams... Everything else is different. Lots of external bolt-on stuff is the same.

The Turbo block has oil squirters that squirt oil on the underside of the piston to cool it down. N/A blocks do not have the oil squirters.