-
Oops...
I made a major screwup. I did my 120k service on my '91 VR4, thought I did alright, as I started up the car, no leaks, runs great. I go to fill it up and I've made a breadcrumb trail of oil from my house to the station (2 blocks). I get back and look to see where it is leaking from, and is running down overtop of the filter (not from the filter though). I think I may have busted the oil cooler bypass line (at least that is what I think it is... rather large bolt coming out of the side of the oil filter housing w/ banjo fitting going back towards block). Does anyone know where I can get a replacement line, or what I can use to replace it (something possibly AN style?)
-
How about you sending the partsyou stole from at least 2 people back then try to get some advise?
-
I'm sorry, If someone has problem with me, then they need to say so. Any parts that I have been sent from members to me have been sent back to them. If you're here to start shit, then you had better not be talking hearsay.
-
No shit talkin. No evidence of returned parts in the posts anywhere. There is no room for BS on this forum. If you have returned all parts then I applaud you. If you have not GTFO. It is that simple.
-
Well, I have no proof of returning the parts, because I didn't take photos of shipping them off, who does that. You seem to know who it was, why don't you ask them.
Also, kind of hard to post when you're banned.
-
OK, since this has been cleared up in my machining post... does anyone have any suggestions for my oil problem?
-
A, B, or C?
A: Cooler bypass valve
B: Front turbo feed
C: Cooler lines
https://lh4.googleusercontent.com/oT...u=w909-h682-no
-
-
As far as I can tell, it's the cooler bypass valve, there is a banjo coming off of it and going towards the pass side of the block (I haven't jacked up the car to look where it goes, too dark when I get home right now).
It was a HUGE bolt, facing the front of the car when everything is bolted on (Where you have A circled, but rotated 90 deg towards the front of the vehicle). This is on a 91 VR4, so IDK if they did something different at any point.
-
I am not here to start a bunch of crap, but you do have a plenum cover of mine I lent you to use for schematics to cut custom covers for myself and for others in the forum in general. Been a few years at least now and nothing, no replies or anything on that !!!!
