Meziere Coolant Overflow / Recovery Tank

I'm in the mood to generate some content for some reason.

One of the cool things I did on my build that I never really posted about was scrapping the ugly coolant tank and installing a nice Meziere WR100U. This is a true recovery tank, not just an overflow for racing like you often find.

Here's the tank itself:

http://www.jegs.com/i/Meziere/680/WR...0002/-1?CT=999

The first step is to install some 1/8" NPT to hose adapters.

http://i440.photobucket.com/albums/q.../misc001-1.jpg

Figuring out how you want to mount this type of stuff is usually the hard part, but I had an idea. I found a spare threaded hole in the chassis, and tapped one of the screw holes on the Meziere to that thread. This let me use a single long threaded bolt to secure the tank in place.

http://i440.photobucket.com/albums/q.../misc002-2.jpg

The final product looks great, is firmly secured in place, and works perfectly.

http://i440.photobucket.com/albums/q.../misc003-1.jpg

I’ve been sort of envious of that tank when I saw it. Might have to get me one.

Yeah me too I want one now.

So, it puts the overflow back into the coolant system after pressure goes back down?

Quote:

---

Originally Posted by ictponder

So, it puts the overflow back into the coolant system after pressure goes back down?

---

Yes, it functions just like the stock reservoir. Internally it has a pipe that extends down from the recovery port. That's an important distinction between this and a lot of the aftermarket coolant tanks, which are overflows only.

Oddly enough, i've also been looking for a more permanent reservoir than my iced tea bottle. good stuff.

So you just "T" the line off the water housing to both ports? Ill be picking up a blue one :)

One port goes to the water housing, one is the overflow that dumps to ground just like stock.

I knew that ;)