• K&N 1005 Larger Filter in stock location

    I have confirmed that the KN 1005 oil filter will fit in the stock location and screw right into the filter housing. It fits just fine on the sealing surface and the threads are the same.

    Compared to the stock size filter this thing is huge, the dimension listed do not reflect really how much bigger this filter is until you use both side by side.

    This thing BARELY fits. I would avoid non K&N styles for this filter size because you probably won't get a filter wrench on this, but the nut will work fine.

    This barely cleared my aftermarket oil cooler fittings, but nothing rubs and it fits like stock except its huge.

    It holds a full 8 oz of oil. I did not measure the stock size filter, but I would judge it to be 2 more oz than stock at least. Hopefully someone with a new clean filter can test it for me.

    I finally found a filter than looks like it isn't meant for a lawn mower.

    1.Fits like stock.
    2. Cheap, about $10 on sale.
    3. Locally available.
    4. No mess or having to clean the thing
    5. No complicated parts or seals to fail.
    6. Much larger, more filtration capacity and you will hold slightly more oil, which is always a plus.

    give it a try I don't think you'll go back.


    Part HP-1005 Product Specifications
    Product Style: Oil Filters
    Anti Drain Back Valve: Yes
    Bypass Valve: Yes
    Filter Material: High Flow Premium Media
    Gasket Material: Nitrile Rubber
    Height: 3.406 in (87 mm)
    Outside Diameter: 3.688 in (94 mm)
    PSI Relief Valve: 11-17
    Removal Nut: Yes
    Style: Canister
    Thread Specification: M20 x 1.5
    Weight: 0.95 lb (0.43 kg)
    Product Box Length: 3.81 in (97 mm)
    Product Box Width: 3.81 in (97 mm)
    Product Box Height: 4 in (102 mm)


    Part HP-1004 Product Specifications
    Product Style: Oil Filters
    Anti Drain Back Valve: Yes
    Bypass Valve: Yes
    Filter Material: High Flow Premium Media
    Gasket Material: Nitrile Rubber
    Height: 3.406 in (87 mm)
    Outside Diameter: 3.156 in (80 mm)
    PSI Relief Valve: 11-17
    Removal Nut: Yes
    Style: Canister
    Thread Specification: M20 x 1.5-6H
    Weight: 0.63 lb (0.29 kg)
    Product Box Length: 3.16 in (80 mm)
    Product Box Width: 3.16 in (80 mm)
    Product Box Height: 3.63 in (92 mm)


    This article was originally published in forum thread: K&N 1005 Larger Filter in stock location started by Forest Gump View original post