View Full Version : New Product Garret GTX2860/GTX2863/GTX2867 turbo kits
SnakeSkinner
09-13-2012, 04:18 PM
Garret has hit a home run with these new turbos, these turbos already making a big splash in other platforms in both single and twin set-up's. DR is happy to bring them to the 3/s market teemed to with our legendary US made .120 wall header kit. Want big power turbo set-up with out having to worry about over sea's made cheep headers that fall apart? Want big power with fast spool? look no farther.
Garrett Billet GTX2860/GTX2863/GTX2867 turbo kit (http://www.dynamicracing.com/3000gt-stealth/turbo-kits?product_id=108)
JasonY
09-13-2012, 04:25 PM
Only the best from DR!
:D
Jason
jerrid
09-13-2012, 04:40 PM
matt will you sell just the turbos? i have a older dr800 kit, and its a bit lag for me, gtx2860 would spool by Xrpm
SnakeSkinner
09-13-2012, 05:07 PM
matt will you sell just the turbos? i have a older dr800 kit, and its a bit lag for me, gtx2860 would spool by Xrpm
yes, and will bolt right in.
TurboSinceBirth
09-13-2012, 11:02 PM
Gaaahh. Too many decisions now. Lol. Rebuild the DR-950s and buy some TD05 manifolds, or sell it and buy some of these turbos. :p Basically I'm wanting not necessarily DR-750 spool but something that hits full boost sooner than E16Gs plus supports more power either 7-800AWHP. I'm not exactly sure or set on my power goal until I get to 600AWHP first but you always want more. :)
Which ones are you running Jason? The 2860s?
JasonY
09-13-2012, 11:04 PM
2863's. The 2860's with the T25 housings on a totally stock Z32 engine put down 740 wheel at 29psi :eek:
Here are some numbers from the smallest of these turbos with a T25 .64 back end.
http://i1206.photobucket.com/albums/bb447/specialtyz/GTX60Qpower.jpg
Thats on a bone stock Z32 engine with heads that dont flow for chit.
And here is how they spool vs the GT28RS
http://i1206.photobucket.com/albums/bb447/specialtyz/GTX60vsGT28RSPUMP.jpg
Jason
TurboSinceBirth
09-13-2012, 11:29 PM
2863's. The 2860's with the T25 housings on a totally stock Z32 engine put down 740 wheel at 29psi :eek:
Here are some numbers from the smallest of these turbos with a T25 .64 back end.
http://i1206.photobucket.com/albums/bb447/specialtyz/GTX60Qpower.jpg
Thats on a bone stock Z32 engine with heads that dont flow for chit.
And here is how they spool vs the GT28RS
http://i1206.photobucket.com/albums/bb447/specialtyz/GTX60vsGT28RSPUMP.jpg
Jason
That's crazy making that kind of power out of a stock motor. I don't know anything about Z32s or how well they hold up but those are some nice numbers for those turbos. Garrett must have a very good exhaust housing design to push that much out of a .48 A/R.
I'll be looking forward to your results Jason. I've kept the stroker in storage wanting to eventually use it with a turbo setup, but had to take a step back and sell some of the supporting mods to pursue a better course at the time. Spending $3k+ on a set of turbos isn't out of the question since I've been doing that lately but it all comes down to the characteristics you want out of the turbos I guess. I like to tinker around too much. :)
JasonY
09-14-2012, 06:10 PM
http://i8.photobucket.com/albums/a48/JasonVR4/photobucket-648-1347656699340.jpg
http://i8.photobucket.com/albums/a48/JasonVR4/photobucket-10781-1347656683543.jpg
:)
Jason
keo92stealth
09-14-2012, 06:18 PM
http://i8.photobucket.com/albums/a48/JasonVR4/photobucket-648-1347656699340.jpg
http://i8.photobucket.com/albums/a48/JasonVR4/photobucket-10781-1347656683543.jpg
:)
Jason
Damn man those are sick.
keo92stealth
09-14-2012, 06:19 PM
So are the big custom Dr turbos on the backburner now ?
TurboSinceBirth
09-14-2012, 06:46 PM
So are the big custom Dr turbos on the backburner now ?
No this is just another option now. I think these GTX turbos will probably spool better than most of the DR-800 and up turbos.
keo92stealth
09-14-2012, 07:03 PM
No this is just another option now. I think these GTX turbos will probably spool better than most of the DR-800 and up turbos.
Spool faster but what about power ??
TurboSinceBirth
09-14-2012, 07:48 PM
Spool faster but what about power ??
They won't decimate DR-1300, or 1400 turbos. That's not the point. Whenever someone gets some dyno graphs you'll see.
Matt has the power outputs listed on his website(estimates) ~750-900AWHP respectively for the turbos. I have a feeling those numbers are a little conservative but we won't know until someone pushes them.
I never cared for replacing CHRAs on Garrett turbos like I had to do with the GT-3076Rs, but around $3k for the pair with your choice of turbine housing isn't that bad. There are multiple TD04 options currently that much.
JasonY
09-14-2012, 08:48 PM
Garrett now runs an exchange program on their DBB turbos for rebuilds, so you arent forced to replace them anymore if they need a rebuild.
Jason
niterydr
09-14-2012, 09:49 PM
Mother of god, someone finally made a kit with these....
keo92stealth
09-14-2012, 11:41 PM
They won't decimate DR-1300, or 1400 turbos. That's not the point. Whenever someone gets some dyno graphs you'll see.
Matt has the power outputs listed on his website(estimates) ~750-900AWHP respectively for the turbos. I have a feeling those numbers are a little conservative but we won't know until someone pushes them.
I never cared for replacing CHRAs on Garrett turbos like I had to do with the GT-3076Rs, but around $3k for the pair with your choice of turbine housing isn't that bad. There are multiple TD04 options currently that much.
Yea I seen that . Now we just wait for jason to test em lol. Yea I know 3k for a set of good turbos isn't that bad really . And I'm sure these will spool he'll of a lot faster than pte 5857s on a 3l.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.