View Full Version : mmcd datalog vspd question
elyria_boy
09-23-2010, 12:02 PM
Vspd is that vehicle speed? Because if it is, mine flashes 0, 52, 79, 0, 63, 94, 0, ect... and the graph shows it maxing out and bottoming out in succession. It does this with the sensor disconnected too and when the car is running, not in acc or on position. Also my turn fuse and wiper fuse blow instantly. Anybody have the Vspd issue? I figure I have a open ground somewhere on the fuse issue. Related maybe?
I am pretty sure that parameter does not work on a 3S. It just gives you random crap.
Edit- This was only referring to mmcd software, may work elsewhere.
Keyan
09-25-2010, 12:23 PM
it doesnt work.
HLxDrummer
09-25-2010, 09:30 PM
I'm pretty sure it works on my car with the Scanmaster..
RealMcCoy
09-25-2010, 09:46 PM
Yea, I don't know what the deal is with MMcd, but it feeds me crap on that parameter as well. To bad, it would be handy sometimes...
elyria_boy
09-28-2010, 03:38 PM
Ok, cool. Good to know that is normal. The car went to the shop to get the fuse popping bs taken care of... hopefully. I went at it for 3 hours with a short finder to no success, so I will let somebody else try.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.