Need ideas for boost controller catch can.

[sublime_whatigo]

I keep running into issues with my methanol setup corroding boost controllers, tried a few and one with s.s. parts, no good. Right now Im running the can from a mity vac vacuum pump, but that seems to leak under 20psi. I will probably fab something up this winter but Im looking for something to get me through some more track passes. Any ideas for an off the shelf catch can I can use?

[KeithMac]

I had 6 nozzles in port injection style in the runners and never had a boost control solenoid fail (trust old Blitz SSBC), may be worth re-tinking your nozzle location?.

[bboyalan]

^I concur. Mine was located between the hose barb fitting and TB, so the AEM solenoid was never really exposed to or drenched in the mist. I can only imagine how quick something for that purpose would fill up though. How did your previous attempts look like out of curiosity?

[3000GT MR]

why not run the boost controller before the meth nozzle?

[sublime_whatigo]

Well my meth nozzle is 6 inches from the throttle body on the y-pipe. I just combined my brake and clutch booster so I now have a free spot on the plenum. Have you guys ran meth after the plenum with good results, everything I read says before the t.b. about 6 inches?

I tried the boost just a few inches before the meth nozzle but it looks stupid and only slowed the process a little, when boost hits everything is pressurized so unless its a long ways away it doesnt matter.

[KeithMac]

Here`s what I did, worked very well.

http://img.villagephotos.com/p/2009-9/1347300/Gto006WIweb.jpg