View Full Version : Eight Inch Wide-Body!!!
J_Parker
07-27-2012, 01:49 AM
So... I started making my wide-body, finally. Four inches on either side for a total of eight all around :)
So far its just a rough lumpy mass stuck to the car, but time will smooth it out. Here's what I have to share for now, anyway.
http://www.3sgto.org/members/j_parker/albums/wide-body/4366-img-1872.jpg
http://www.3sgto.org/members/j_parker/albums/wide-body/4365-img-1874.jpg
http://www.3sgto.org/members/j_parker/albums/wide-body/4364-img-1871.jpg
ViperZ
07-27-2012, 03:17 AM
I followed your custom front bumper thread, that being said I can't wait to see how this turns out because I'm sure it's going to be awesome! Subscribed! :)
so...are you going to get tired and sell it in 6 months?
J_Parker
07-27-2012, 01:24 PM
No, I doubt I'll ever get rid of this car, I'll never see my money again if I do.
NOMIEZVR4
07-27-2012, 01:33 PM
take lots of pics.
J_Parker
07-27-2012, 02:55 PM
I shall, I want to keep good documentation of this. Every step of the way I'm going to try to take some pictures.
J_Parker
07-27-2012, 06:58 PM
Here's some more progress, I started doing some of the rough shaping so I could have an idea of what I'm going for. There's still some spots where the foam didn't take and will need to be re-filled. I may just use some of the blue board insulation and cut some thin strips to run along all the edges which should make it easier to get the desired lip on them.
http://www.3sgto.org/members/j_parker/albums/wide-body/4410-img-1883.jpg
http://www.3sgto.org/members/j_parker/albums/wide-body/4408-img-1882.jpg
P.S.
This brings the car to just under 7' wide :D
vroom4
07-27-2012, 07:57 PM
You are going to need to do some door work too or its going to look silly I believe.
J_Parker
07-27-2012, 08:11 PM
You are going to need to do some door work too or its going to look silly I believe.
We'll see when I get there, I don't think I'll need to though.
futurevr4man
07-27-2012, 10:15 PM
not a fan as of now, but i still have faith at the moment
J_Parker
07-28-2012, 01:26 AM
not a fan as of now, but i still have faith at the moment
I'm on the fence about it as well, but I want to see what I can do with it for now. If it turns out to be a complete dumpster fire, all I have to do is peel the foam off lol.
J_Parker
07-28-2012, 02:08 AM
As a matter of fact, I have no choice but to scrap it. The width I shot for is highly illegal in my province, So off it comes, I guess I'm stuck with C-7 Carbon Fenders. :(
2turbosandmanyrepairs
07-28-2012, 02:40 AM
As a matter of fact, I have no choice but to scrap it. The width I shot for is highly illegal in my province, So off it comes, I guess I'm stuck with C-7 Carbon Fenders. :(
6 inch wide body thread?
dude, 2" wide on either side should be plenty. 4" wide is excessive.
geez that's wide.. you don't want to end up with the beached whale look.
www.aso-motorsport.com • (http://www.aso-motorsport.com/forum/viewtopic.php?f=18&t=786)
like said 2 inches at the absolute max. actually think fenderflares suits better if anything like MR's sig pic.
J_Parker
07-29-2012, 02:22 AM
I've scrapped the idea entirely and am moving onto some different plans now. I ordered a 2010 Evo-X bumper and headlights.
CoopKill
07-29-2012, 11:09 AM
One of these you must get past 80%!
You have some great ideas, but need to preplan to avoid your 80% wall...
Waiting for the next.
anyonebutme
07-29-2012, 01:04 PM
1. where ever you live sucks, lol
2. that black widebody that was posted ALMOST looked good. They screwed up when they elongated the front bumper.......you have to shorten it to look right with our wheelbase. Also you have to change the geometry on the front end to work with super offset wheels like that.......hense why that car couldn't turn it's wheels more than shown. Just try parking that, lol. The side vents also need to go.
J_Parker
07-29-2012, 02:50 PM
One of these you must get past 80%!
You have some great ideas, but need to preplan to avoid your 80% wall...
Waiting for the next.
Some of which I do, I finish, but for the most part I change my plans like I do my underwear. This Evo-X front end will be the one that gets full completion though. Right now the car is being stripped down, gutting out all the unessential metals, and a lot of electrical is being pulled out from the harnesses. After I finish the mounting for the Evo bumper/headlights the shell will be going for paint.
green-lantern
07-29-2012, 02:57 PM
Did you remove the pics? I'm not seeing them.
1. where ever you live sucks, lol
2. that black widebody that was posted ALMOST looked good. They screwed up when they elongated the front bumper.......you have to shorten it to look right with our wheelbase. Also you have to change the geometry on the front end to work with super offset wheels like that.......hense why that car couldn't turn it's wheels more than shown. Just try parking that, lol. The side vents also need to go.
Agreed but I sort of like the side vents.
J_Parker
07-29-2012, 02:59 PM
Did you remove the pics? I'm not seeing them.
I did, I didn't want to crap up the site with pics that have no relevance anymore.
green-lantern
07-29-2012, 03:01 PM
I never got a chance to see them :p
futurevr4man
07-29-2012, 05:27 PM
the photoshopped evo X bumper on the 3k looks great. would be cool if you could mimic that
my favorite widebody is still probably glecar's. i wish something similar was offered.
green-lantern
07-29-2012, 08:02 PM
my favorite widebody is still probably glecar's. i wish something similar was offered.
Pics? Not sure I've seen that. BTW where have you been?
J_Parker
07-30-2012, 01:58 AM
Good news on this Evo-X bumper, the front fascia width for our cars is about ~70" the width of the Evo fascia is 69.4"!! Once this thing is here I'm expecting to have minimal work to make it happen, I think with just making the mounting brackets for it, and modifying the fenders to accept the headlights it should actually be a pretty easy swap... The hood is where things will get tricky, but I have a plan for it.
Pics? Not sure I've seen that. BTW where have you been?
i've been around, paul....i'm still beating you in posts, aren't i? :p
Garaget | Dodge Stealth R/T TTR / 3000GT (1991) (http://www.garaget.org/?car=99458&image=934079)
p.s.
not so much a fan of the front, and undecided on the back bumper. the sides (minus the vents) are close to perfect though.
J_Parker
07-30-2012, 02:20 AM
i've been around, paul....i'm still beating you in posts, aren't i? :p
Garaget | Dodge Stealth R/T TTR / 3000GT (1991) (http://www.garaget.org/?car=99458&image=934079)
p.s.
not so much a fan of the front, and undecided on the back bumper. the sides (minus the vents) are close to perfect though.
This is by far my favourite, it's also the look I was going for.
Emilie@GZP
07-30-2012, 03:50 PM
i've been around, paul....i'm still beating you in posts, aren't i? :p
Garaget | Dodge Stealth R/T TTR / 3000GT (1991) (http://www.garaget.org/?car=99458&image=934079)
p.s.
not so much a fan of the front, and undecided on the back bumper. the sides (minus the vents) are close to perfect though.
The sides are just an exaggerated pit roadM style sideskirt...
J_Parker
07-30-2012, 04:02 PM
The sides are just an exaggerated pit roadM style sideskirt...
AFAIK that's what he had started with...
The sides are just an exaggerated pit roadM style sideskirt...
the only fender flares i've seen from pitroadm were bolt-on style flares. if you've got pics of something similar to what glecar has here, post them up.
Jimvr4
07-30-2012, 06:13 PM
One of the few wide bodies I've seen in person. This NA is really well done with 20 inch deep dish rims that look pretty cool.
http://s156.photobucket.com/albums/t26/duchguy/Socal%203S%20meet%202-25-12/?action=view¤t=DSCF3795.jpg
Hmm - that direct link doesn't want to work. The series of pics is here (http://s156.photobucket.com/albums/t26/duchguy/Socal%203S%20meet%202-25-12/)
green-lantern
07-30-2012, 06:22 PM
i've been around, paul....i'm still beating you in posts, aren't i? :p
Garaget | Dodge Stealth R/T TTR / 3000GT (1991) (http://www.garaget.org/?car=99458&image=934079)
p.s.
not so much a fan of the front, and undecided on the back bumper. the sides (minus the vents) are close to perfect though.
I think I like the "whale" one better.
CoopKill
07-30-2012, 08:26 PM
One of the few wide bodies I've seen in person. This NA is really well done with 20 inch deep dish rims that look pretty cool.
http://s156.photobucket.com/albums/t26/duchguy/Socal%203S%20meet%202-25-12/?action=view¤t=DSCF3795.jpg
Hmm - that direct link doesn't want to work. The series of pics is here (http://s156.photobucket.com/albums/t26/duchguy/Socal%203S%20meet%202-25-12/)
http://i156.photobucket.com/albums/t26/duchguy/Socal%203S%20meet%202-25-12/DSCF3795.jpg
rossfashow
07-31-2012, 01:27 AM
for some reason i cant see the images
too square for my taste, jim.
J_Parker
07-31-2012, 11:22 AM
too square for my taste, jim.
For some reason, that one is screaming 2010 Camaro at me...
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.