View Full Version : 100w HID high beams
Patryn
07-22-2012, 11:11 AM
Just curious if anyone has used 100w HID high beams and if you ran power straight from the battery for them. I'm looking a some of the HID digital kits, but get varying information on the amperage draw at startup and when running them. If anyone has done this conversion let me know what worked for you and any special wiring you had to make if needed.
lparrill
07-22-2012, 12:29 PM
100w? Wouldn't you be melting your housings? Some Chevy guys have issues with 55w getting too hot
dbest671
07-22-2012, 01:09 PM
100W is just overkill, and probably will piss off every driver on the road. 55W is very bright, and they also come in digital ballast. I have a set of retrosolutions on the Spyder in 5K, and very happy with them.
If you get a 100W HID kit, I pray that you are going to do a retrofit for a real HID projector system.
If he has lexan lenses, he may melt/burn the lens. But to melt the actual housing, they headlights would have to be left on for a long time.
terrets
07-22-2012, 02:00 PM
You craazzzyyy! Seriously though, why 100W? I also think they would get too hot.
I know I would hate driving at you.
MeTarzan
07-22-2012, 02:07 PM
you do realize that the High beams arent really great to put HIDs in due to the warm up cycle for the bulbs...Cars that have HID high beams have a flapper of some sort to change the beam pattern not turn the bulb on and off
terrets
07-22-2012, 02:12 PM
you do realize that the High beams arent really great to put HIDs in due to the warm up cycle for the bulbs...Cars that have HID high beams have a flapper of some sort to change the beam pattern not turn the bulb on and off
True story bro.
Patryn
07-22-2012, 02:29 PM
Yes, I know most of this from reading on it, just wondering if anyone has "actually" tried this and can say from actually doing it what works and what didn't with the setup on our cars. I don't plan on blinding people with 100w high beams, just needing good lighting for country roads with way to many deer on them, is the main reason I want something super bright. 55w on low beams do not get to hot for our housings, but yes a 100w may, but I don't know, would rather see if anyone has done this before I even attempt it, as its not a common setup by any means other than for some off-roading.
terrets
07-22-2012, 02:37 PM
Yes, I know most of this from reading on it, just wondering if anyone has "actually" tried this and can say from actually doing it what works and what didn't with the setup on our cars. I don't plan on blinding people with 100w high beams, just needing good lighting for country roads with way to many deer on them, is the main reason I want something super bright. 55w on low beams do not get to hot for our housings, but yes a 100w may, but I don't know, would rather see if anyone has done this before I even attempt it, as its not a common setup by any means other than for some off-roading.
Then why not integrate into a sort of fog light set up. Or you could just get some off-road lights, those things frackin rock! I got some for $30 at harbor freight and they are insanely bright.
Patryn
07-22-2012, 05:04 PM
Just trying not to blaze a new trail, would like to see if anyone has attempted anything like a 100w HID in our high beams, maybe even 75w.
DocWalt
07-23-2012, 02:41 AM
I'm going to assume nobody has bothered, for all of the very good reasons mentioned above.
MeTarzan
07-23-2012, 06:43 AM
55W HIDs are pretty damn bright there really would be no reason to go with anything stronger. If you want something bright for your high beams just put in some Silverstars (I really like them in my car) or even look into LED's
rog93stealth
07-23-2012, 09:58 PM
I have only ever run 35w hiss and never had any problems seeing
Patryn
07-24-2012, 11:15 AM
I'm running 55w on the low beams and they are great. I'm not asking about 35w, I'm only looking for someone that might have tried this before on our cars to let me know if it worked out or not. I can't be the only one driving in deer infested country roads and wanting some bright high beams. I did this on a the jeep wrangler, but added an extra set of lights for that one and it worked out nice. I did this on my Yamaha R1 with a 75w and works nicely. However, on those two previous setups I had found people who had done the conversions, so was easy to see what worked.
DocWalt
07-24-2012, 11:27 AM
You will definitely need to run a relay directly to the battery, the stock wiring can't handle the load.
Patryn
07-24-2012, 11:35 AM
You will definitely need to run a relay directly to the battery, the stock wiring can't handle the load.
Yes, I don't want to melt the wiring. Also, I have the Lexan type headlights so that is another concern. Best not to attempt it if no one has tried it before, so doing the query beforehand.
DocWalt
07-24-2012, 12:10 PM
I doubt there will be heat issues if you're moving, HIDs are pretty efficient and don't make nearly as much heat as people seem to think.
MeTarzan
07-24-2012, 05:36 PM
HID's get much hotter than the common headlamp...if you have ever had a halogen torch lamp that is 500W that will show you about how hot a 100W HID will get.
DocWalt
07-24-2012, 05:48 PM
Yes, an HID is VERY hot in a VERY localized area where the arc is. Everywhere else is cooler. How can a more efficient HID possibly make more overall heat than a halogen. To get equal light output to a normal 55w halogen with an HID you only need 35W. That's a significantly more efficient lamp.
MeTarzan
07-24-2012, 11:24 PM
it is more efficient but still creates the same amount of heat. thus my comparisson of the 500W halogen to the 100W HID since they have pretty close to the same LUMENS ( ie. brightness)
and an HID is basically lightning in a bottle and that localized heat sealed into a glass bubble of a projector housing will have to go somewhere and when it does it melts stuff.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.