PDA

View Full Version : 1st Gen 92 NA brake conversion with TT calipers and rotors



lgvenable
06-08-2012, 11:43 PM
Well after searching, no joy with an exact thread on this forum:
except this one from the other 3S forum...

3000GT/Stealth International Message Center (http://www.3si.org/forum/f13/complete-how-tt-brake-swap-172924/)

my question is pretty simple, I'm running 9 inch moda r5's on my first gen all the way around, 245ZR40's all four corners.

Can I get by with just a conversion of the front TT calipers and rotors on my NA, or do I have to do the entire enchilada as in the referenced thread? The difference seems to be 467.00?

13diamonds
06-09-2012, 01:21 AM
If i'm not mistaken it was later found since the dsm knuckles are the same as NA knuckles..You could use these adapter kits instead
RTM Racing :: MITSUBISHI :: DSM: 2g (95-99) :: Brakes :: Brake Upgrades :: Stealth/3000GT VR4 Brake Upgrade (http://www.rtmracing.com/xcart/home.php?cat=1434)

lgvenable
06-09-2012, 04:27 PM
Meaning, I simply need to bolt on TT calipers and a pair of Cobra rotors with the hardware mentioned? Thanks for the link; I think you just made up my mind and suppled me with the link to a VR4 conversion on my front brakes.
Larry

lgvenable
06-10-2012, 08:27 AM
Is there any type similar kit, or brake set from an alternative car which csn be placed on the rear to give big brakes there too?