Nihil
05-29-2012, 02:47 AM
http://img.photobucket.com/albums/v229/prevailingevils/Ads/EMad.jpg
I bought this originally off of blackstealth used, but I'm selling it as I need funding for repairs and it's sat for two years now collecting dust
What's included:
-Greddy EMU
-Boomslang harness for 1st gen 3S car. Modified so you can easily switch between stage 2.5 or stage 3 wiring.
-Latest Greddy adaptor for stage 3 wiring (prevents Injector Check Engine Light from occurring).
-Greddy Pressure sensor (45psi)
-Greddy Pressure sensor harness.
-Wideband harness for hooking up wideband signal to it.
Detailed highlights from blackstealth
Made second generation Greddy CEL adapter, uses bullet style connectors so it can be installed easily into the boomslang harness, boomslang harness has six bullet connectors so you can easily make the switch from Stage 2.5 or Stage 3 wiring.
Added a yellow-red Sub-Injector wire (left over from Blue Emanage projects) into the Boomslang harness (more accurately into the Greddy Ultimate connector). Boomslang deletes this option, but I put it back in. I like to keep my options open.
The boomslang is setup for coolant and air. The coolant option is necessary if you want to take advantage of the "AF target map".
The tune that's on there is setup for RC550 injectors, Supra pump with stock FPR (using erik gross hotwire method) and 15G turbos.
Currently Boomslang is wired up as stage 2.5. If you want to go to stage 3 you will have to disconnect six bullet wires and move them to the other bullet connectors. Once that is accomplished there will be six unused bullet connectors, this is where you plug in the greddy CEL adaptor into. The ECU side will see these fake injectors and be happy. Jumpers on the emanage circuit board will have to be adjusted when going from stage 2.5 to stage 3
I'm looking to get $575 o.b.o. +paypal fee.
I bought this originally off of blackstealth used, but I'm selling it as I need funding for repairs and it's sat for two years now collecting dust
What's included:
-Greddy EMU
-Boomslang harness for 1st gen 3S car. Modified so you can easily switch between stage 2.5 or stage 3 wiring.
-Latest Greddy adaptor for stage 3 wiring (prevents Injector Check Engine Light from occurring).
-Greddy Pressure sensor (45psi)
-Greddy Pressure sensor harness.
-Wideband harness for hooking up wideband signal to it.
Detailed highlights from blackstealth
Made second generation Greddy CEL adapter, uses bullet style connectors so it can be installed easily into the boomslang harness, boomslang harness has six bullet connectors so you can easily make the switch from Stage 2.5 or Stage 3 wiring.
Added a yellow-red Sub-Injector wire (left over from Blue Emanage projects) into the Boomslang harness (more accurately into the Greddy Ultimate connector). Boomslang deletes this option, but I put it back in. I like to keep my options open.
The boomslang is setup for coolant and air. The coolant option is necessary if you want to take advantage of the "AF target map".
The tune that's on there is setup for RC550 injectors, Supra pump with stock FPR (using erik gross hotwire method) and 15G turbos.
Currently Boomslang is wired up as stage 2.5. If you want to go to stage 3 you will have to disconnect six bullet wires and move them to the other bullet connectors. Once that is accomplished there will be six unused bullet connectors, this is where you plug in the greddy CEL adaptor into. The ECU side will see these fake injectors and be happy. Jumpers on the emanage circuit board will have to be adjusted when going from stage 2.5 to stage 3
I'm looking to get $575 o.b.o. +paypal fee.