PDA

View Full Version : How is your front AA dam installed?



Jstarr427
05-28-2012, 11:41 PM
So last weekend, I pulled the bumper on my 91 to do a few things- Installed DSM sidemounts, and swapped out the center duct for the radiator. apparently there are a few different versions for the 91. I also replaced the lower center bracket as well (didn't have one there previously)

As things are setup now the bracket is connected to the duct by the the plastic clips (obviously) but they're behind the lower lip of the bumper, not on top. like they are for all 2g's. When installing the AA dam, the tabs on the dam hit the places where the bracket and the duct connect (It's confusing, but I'll get pics). this is causing the very top of the dam to bow in visibly when it's deployed (the lips don't stick far enough forward because they cant). I checked and there is one part number for the AA dam for all years, and I have the correct bracket and duct based on my VIN#, however the shit just doesn't fit right. What I did notice was that the cutouts in the AA dam do match to where the bolts are that secure the bracket to the bumper. is the very front edge of the dam supposed to be secured between the bracket and the bumper? The brackets were missing when I bought the car, so I'm not exactly sure how things are supposed to line up here...