PDA

View Full Version : 98 ECU part number md347252 flash capable?



Gearheadvr4
05-10-2012, 09:42 PM
Can an 98 ECU part number md347252 be modified or flashed?

ChargerX3
05-10-2012, 10:04 PM
In short...yes. Any 98-99 ECU can be. It just so happens that yours takes the most work to make it happen.

Gearheadvr4
05-10-2012, 11:52 PM
Can anyone give me ideas on what needs changed out to make it into a flash ecu?

R/T93
05-11-2012, 12:09 AM
That's a SOHC ecu, not sure about them. Let the ecu masters chime in

For reference....
http://www.wrenchmonkey.com/Webpages/ECUpartnumbers.html

TurboSinceBirth
05-11-2012, 01:28 AM
The SOHC ECUs haven't been modified yet to clone a VR-4 ECU. It requires extensive work and I'm sure that will be a last option because there are plenty of other ECUs that can be modified. You'd be better off looking for a SL or VR-4 ECU.

J. Fast
05-11-2012, 01:51 AM
Is the 99 VR4 ecu the most inexpensive option when you add in the patch harnesses and additional work?

I read somewhere an oem one is about $800. How much more or less do you have to throw at the coversion from a 99 vs a 98 ecu?

R/T93
05-11-2012, 02:12 AM
Is the 99 VR4 ecu the most inexpensive option when you add in the patch harnesses and additional work?

I read somewhere an oem one is about $800. How much more or less do you have to throw at the coversion from a 99 vs a 98 ecu?

98 and 99 are practically the same. Dealerships are out of them. A couple guys are converting montero and diamante ecus into perfect Vr4 clones for little expense compared to the real thing

From the phone.

Gearheadvr4
05-11-2012, 02:38 AM
I got the ECU for pretty cheap so I'm hoping I can make it work. I've had a few offers for it but I'm considering keeping it.

J-Groove
05-11-2012, 09:52 AM
Contact Jester

http://www.3sgto.org/f62/98-99-flashable-clone-vr4-ecus-options-8543.html

-John

Chris@Rvengeperformance
05-11-2012, 09:55 AM
Is the 99 VR4 ecu the most inexpensive option when you add in the patch harnesses and additional work?

I read somewhere an oem one is about $800. How much more or less do you have to throw at the coversion from a 99 vs a 98 ecu?

you need a patch harness with any flashable ecu if your car isn't a 98 or 99.

J. Fast
05-11-2012, 12:51 PM
Do you also need an Evo or GM MAS, and a 3 bar map sensor? What did your setup require? How much for everything involved in the tuning strategy. MAS, Map Sensor, Patch Harness, and ECU?

Chris@Rvengeperformance
05-11-2012, 01:05 PM
Do you also need an Evo or GM MAS, and a 3 bar map sensor? What did your setup require? How much for everything involved in the tuning strategy. MAS, Map Sensor, Patch Harness, and ECU?

You don't really need an evo mas, it just accurately counts a lot more air than our maf. You could run the stock maf. You don't need the map sensor at all unless you want to control boost with the stock ecu.

My setup is:

1) Evo maf part # 399 ($95), a 482 will work and is about half the price and you could use the stocker if you want to get a feel for things first.
2) blackstealth conversion harness. It was $250, but he lowered the price to $200, I guess due to competition or he just wanted to get rid of some inventory. If you have a 98 or 99 chassis or engine wiring harness then you don't need this. There are other suppliers as well.
3)99 sl ecu, was $150, but the pricing varies a lot. If you need some of the vr4 specific features like built in boost control this is not the ecu for you. You can get a real 99 vr4 one or one of the converted ecus.
4)tactrix open port 2, $169

Basically you just need a flashable ecu and a way to connect it to your car and then the tactrix cable to make changes.

ChargerX3
05-11-2012, 01:25 PM
This ecu will have a very hard time starting the car being that it is setup for a distributor ignition and not coil packs.

Gearheadvr4
05-11-2012, 03:49 PM
I have the harness for a 98 but it's the SOHC. I may be able to hack off the ends and make a conversion cable to fit a 92 VR4 harness.

BlackStealth
05-11-2012, 04:42 PM
The 98 SOHC is the same PCB as the 98 SL, and 98 VR4 but it will need many more components added/replaced to make it work. At this time, nobody has successfully converted one over yet.

In other news, today I just got a 1999 3000GT VR4 Euro flash ECU working on my 93 RT/TT. What makes it interesting is that it uses the old style ECU connectors, so it is quite possible to move just a few wires around on the factory harness without the need of a conversion harness!

Gearheadvr4
05-11-2012, 05:09 PM
That is big news! That makes the conversion possibly really economical since the conversion harness would have the most expensive part for me!

I volunteer to be a tester!

J-Groove
05-11-2012, 05:18 PM
In other news, today I just got a 1999 3000GT VR4 Euro flash ECU working on my 93 RT/TT. What makes it interesting is that it uses the old style ECU connectors, so it is quite possible to move just a few wires around on the factory harness without the need of a conversion harness!

That is awesome!

Greg E
05-11-2012, 08:33 PM
The 98 SOHC is the same PCB as the 98 SL, and 98 VR4 but it will need many more components added/replaced to make it work. At this time, nobody has successfully converted one over yet.

In other news, today I just got a 1999 3000GT VR4 Euro flash ECU working on my 93 RT/TT. What makes it interesting is that it uses the old style ECU connectors, so it is quite possible to move just a few wires around on the factory harness without the need of a conversion harness!

I was curious about this. Adam has been asking me to start disassembling the euro ROM to take advantage of all the tables I've discovered and port my ROM mods over.

Gearheadvr4
05-11-2012, 08:39 PM
So the Euro cars stayed with the first gen 3 plug? Wonder why?

chansigril
05-11-2012, 08:44 PM
The 98 SOHC is the same PCB as the 98 SL, and 98 VR4 but it will need many more components added/replaced to make it work. At this time, nobody has successfully converted one over yet.

In other news, today I just got a 1999 3000GT VR4 Euro flash ECU working on my 93 RT/TT. What makes it interesting is that it uses the old style ECU connectors, so it is quite possible to move just a few wires around on the factory harness without the need of a conversion harness!

my pants are tight. right now, they are tight.

ChargerX3
05-11-2012, 09:34 PM
The 98 SOHC is the same PCB as the 98 SL, and 98 VR4 but it will need many more components added/replaced to make it work. At this time, nobody has successfully converted one over yet.

In other news, today I just got a 1999 3000GT VR4 Euro flash ECU working on my 93 RT/TT. What makes it interesting is that it uses the old style ECU connectors, so it is quite possible to move just a few wires around on the factory harness without the need of a conversion harness!
Yea, i was going to tackle this one as i only have the SL and VR4 for the 98's. Wanted to compare it to the Diamante which i believe is identical.

Great to see you get that ECU working. Was hoping those corrections in the code would get you running. Didnt know they had the same harness though as the 1st gens. Would make for a great alternate. How much are the Euro ones going for and are they readily available?

BlackStealth
05-12-2012, 08:55 AM
The 99 Euro ECU has a 4 plug connector the same found on 94-97 USA cars. A total of 9 wires have to be moved on the 94-95 USA harness to make it a perfect plug and play. Super easy.

On the 91-93 USA vehicles, there's a little more work involved, a 4th connector(12pin) is required and wiring in an OBD2 connector. Surprisingly, it's also just 9 wires that needs to moved to make it a perfect plug and play.

I'm going to put the Euro ECU up for sale soon as I don't need two.

99 vr4
12-11-2012, 07:22 PM
Can an 98 ECU part number md347252 be modified or flashed?

Even though this is old, I figured I would throw this out there. I have converted many SOHC ECU's for the VR4 Clone ECU. In fact I have converted four or five MD347252 ECU's into full VR4 Clones. The SOHC is very easy to modify and only takes a few more components than the DOHC Montero.

For pricing and ordering information, please go to Ordering (http://tinyurl.com/7rldxbz)

Dbeltran24
01-04-2013, 05:39 PM
Even though this is old, I figured I would throw this out there. I have converted many SOHC ECU's for the VR4 Clone ECU. In fact I have converted four or five MD347252 ECU's into full VR4 Clones. The SOHC is very easy to modify and only takes a few more components than the DOHC Montero.

For pricing and ordering information, please go to Ordering (http://tinyurl.com/7rldxbz)

When converting SOHC ECU's into VR4 Cloned ECU's, are hardware modifications needed? or is it only the code that is changed? Just trying to figure out if the SOHC ECU can be flashed in stock form or if the mods are what make it flashable. Also, can EVOScan pull data from a SOHC ECU or is a chrome-like rom needed first?

BlackStealth
01-04-2013, 06:41 PM
SOHC needs hardware modifications if you want to use it as a VR4 ECU. SOHC can be flashed, I've flashed mine with Chrome 2.0, I use this ECU for bench testing only, not for driving. Evoscan works with SOHC ECU non-chrome and chrome versions.

Dbeltran24
01-04-2013, 07:19 PM
SOHC needs hardware modifications if you want to use it as a VR4 ECU. SOHC can be flashed, I've flashed mine with Chrome 2.0, I use this ECU for bench testing only, not for driving. Evoscan works with SOHC ECU non-chrome and chrome versions.

Thanks for the info.

ChargerX3
01-04-2013, 07:20 PM
Ive flashed a SOHC and a Diamante ECU and ran it. Ran like crap, but it ran. I was still messing with some things though.

99 vr4
01-05-2013, 09:52 AM
When converting SOHC ECU's into VR4 Cloned ECU's, are hardware modifications needed? or is it only the code that is changed? Just trying to figure out if the SOHC ECU can be flashed in stock form or if the mods are what make it flashable. Also, can EVOScan pull data from a SOHC ECU or is a chrome-like rom needed first?

Hardware modifications are required. The ECU is flashable and you can load VR4 code with no problems but it will not run until AFTER the hardware modifications are done.


Ive flashed a SOHC and a Diamante ECU and ran it. Ran like crap, but it ran. I was still messing with some things though.

Oh no . . . this will cause problems both short term and long term engine reliability. You NEED to have the hardware modified. This can not be compensated via software.

Don't waste your time and your engine trying to make this work. Just toss it out or trade it in for a core.

Brett

donniekak
01-05-2013, 12:11 PM
Ive flashed a SOHC and a Diamante ECU and ran it. Ran like crap, but it ran. I was still messing with some things though.

If you have a dohc ecu, it's easy to see the differences.

ChargerX3
01-05-2013, 12:42 PM
Hardware modifications are required. The ECU is flashable and you can load VR4 code with no problems but it will not run until AFTER the hardware modifications are done.



Oh no . . . this will cause problems both short term and long term engine reliability. You NEED to have the hardware modified. This can not be compensated via software.

Don't waste your time and your engine trying to make this work. Just toss it out or trade it in for a core.

Brett
Brett,

You can run the car with the lower populated boards, but yes it does cause some problems because of unpopulated circuits that the VR4 needs to fully operate properly. I know some of the guys had issues trying to start theirs because of the resistance value of the ignition circuit. Mine would start though. Now i only use the diamante ecu to preflash my rom, so i dont blow out my vr4 ECU.

BTW ive already PM'd you about some conversion options, but have not heard back. PM me when you get a minute.

If you have a dohc ecu, it's easy to see the differences.

Donni,

I know this. They are all the same for each year minus how they are populated on the board.