PDA

View Full Version : For the people attending NG



anyonebutme
05-08-2012, 11:30 AM
I might be bringing a set of scales to the NG, so I'm asking if there is any intrest in seeing how much your car weighs?

I'm thinking like $10 and you get to know your cornerweights. Who would be up for that?

Greg E
05-08-2012, 11:33 AM
Hell yeah!

green-lantern
05-08-2012, 12:02 PM
I would

futurevr4man
05-08-2012, 12:08 PM
i would although mine is a guaranteed pig.

j2k4
05-08-2012, 12:10 PM
i would although mine is a guaranteed pig.

Really heavy on the right front with those HUGE snails...:)

B-Man
05-08-2012, 12:14 PM
Are you actually gonna give people with coilovers enough time to corner balance their cars?

BaadVR4
05-08-2012, 08:15 PM
I would.

donniekak
05-08-2012, 08:21 PM
Is this like an intervention for fat cars?

Rakuny
05-08-2012, 09:02 PM
I'd be down

green-lantern
05-08-2012, 09:41 PM
Is this like an intervention for fat cars?

:lol:

anyonebutme
05-08-2012, 10:22 PM
Are you actually gonna give people with coilovers enough time to corner balance their cars?

probably not, as

1. I'd have to take the time to perfectly level the pads instead of "that's damn close".

2. it takes a considerable amount of time to corner balance a 3S, and time costs money. Or interferes with me eating tacos and getting wasted. something like that.

but something may be able to be worked out.

Alex3000gt
05-08-2012, 11:35 PM
If the scales at the track are not working again this year, I would be in.

anyonebutme
05-09-2012, 12:38 AM
related: If anyone has any lowering springs they have uninstalled, I will bring my spring tester to test their spring rates so this platform has real numbers to go off of. The current rates Tein and other's list are flat out wrong.

UTRacerX9
05-09-2012, 12:44 AM
The current rates Tein and other's list are flat out wrong.

First I've heard of this, what others are you referring to? From what I remember on 3SI, both Eibach GC's and Megan's have been tested and found accurate. KSport... no idea.

mb3000
05-09-2012, 12:49 AM
In for suspension info.

DuTTch
05-09-2012, 12:59 AM
I got 10 bucks

anyonebutme
05-09-2012, 01:06 AM
First I've heard of this, what others are you referring to? From what I remember on 3SI, both Eibach GC's and Megan's have been tested and found accurate. KSport... no idea.

Not talking coilovers. Dennis can insert his bone to pick with those springs here.

Listed specs:

Stock 2G: 212/157 (progressive or straight?)
Tein H: 218/145 (softer than stock?!? obliviously progressive so these numbers are pointless)
Tein S: 235/157 (obliviously progressive so these numbers are pointless)
Megan: 250/230 (looks like progressive so these numbers are pointless, as well as out of wack if true)
Eibach: 230-430/155-230 is rumored, but Eibach will not disclose (numbers I expect for progressives, but these numbers are pointless without a distance measurement and spring rate @ installed ride height length)
H&R: unknown and H&R will not disclose, in other applications they are harder than Eibach, but customer testimonials say they are softer?
B&H: unknown
Intrax: unknown

I've searched far and wide, really the only info you will find is "this spring will get rid of that 4x4 look". People only care about how much it lowers. I am not people.

UTRacerX9
05-09-2012, 01:14 AM
Ah, ok. When you said Tein my mind went to their coilovers, not their springs. Would be interesting to find out the rates of various manufacturers, but you'd also have to account for age and use, springs can soften over time.

lat42MS
05-09-2012, 10:54 AM
For 10 dollars? sure. I think I'm at 3,600 but It'd be nice to check.

Boostaddict
05-09-2012, 12:58 PM
Most of the "progressive" rate springs I've tested on an MTS compression load frame are surprisingly linear over the compression range that they'd see in use, so I wouldn't say that rate numbers on progressive springs are "pointless". Of course if the spring rate is not tested in a range around the seat height then yeah, they could be bad numbers.

Maximal
05-09-2012, 01:36 PM
I would probably be in....

anyonebutme
05-09-2012, 07:54 PM
Most of the "progressive" rate springs I've tested on an MTS compression load frame are surprisingly linear over the compression range that they'd see in use, so I wouldn't say that rate numbers on progressive springs are "pointless". Of course if the spring rate is not tested in a range around the seat height then yeah, they could be bad numbers.


The thing is, everyone says lowering springs feel stiffer than stock.......while the numbers they publish do not support it. I suspect they listed the numbers for the first inch of travel instead of at design height.

Warning, boring technical info starting.

There's technically no such thing as progressive rate. "Progressive rates" mean as the coils deaden out, the rates increase because spring rate is a function of active coils and coil diameter. Any spring where coils are placed close together and designed to touch is a progressive rate because as active coils are taken out, the spring rate increases beyond what it's straight rate is.

i3igpete
05-10-2012, 01:44 AM
using a load cell probably isn't necessary... the software we write at my work can predict the load curve, given the coil diameter and coil spacing as a function of helix angle.

anyonebutme
05-10-2012, 12:15 PM
using a load cell probably isn't necessary... the software we write at my work can predict the load curve, given the coil diameter and coil spacing as a function of helix angle.

problem is, by the time I measured that I could have tested it.

i3igpete
05-10-2012, 12:30 PM
true story

niterydr
09-20-2012, 10:15 PM
Not talking coilovers. Dennis can insert his bone to pick with those springs here.

Listed specs:

Stock 2G: 212/157 (progressive or straight?)
Tein H: 218/145 (softer than stock?!? obliviously progressive so these numbers are pointless)
Tein S: 235/157 (obliviously progressive so these numbers are pointless)
Megan: 250/230 (looks like progressive so these numbers are pointless, as well as out of wack if true)
Eibach: 230-430/155-230 is rumored, but Eibach will not disclose (numbers I expect for progressives, but these numbers are pointless without a distance measurement and spring rate @ installed ride height length)
H&R: unknown and H&R will not disclose, in other applications they are harder than Eibach, but customer testimonials say they are softer?
B&H: unknown
Intrax: unknown

I've searched far and wide, really the only info you will find is "this spring will get rid of that 4x4 look". People only care about how much it lowers. I am not people.

So any recommendation for a car going with Bilsteins that is more after consistent drag launches and solid street performance?

anyonebutme
09-20-2012, 11:29 PM
If I was drag racing on lowering springs, Megans with spring rubbers in the rear would make quite the setup, but probably would suck on the street.

I recommend Eibachs from our earlier discussion, or the S-techs. Those are known quantities for me.

niterydr
09-21-2012, 12:42 AM
If I was drag racing on lowering springs, Megans with spring rubbers in the rear would make quite the setup, but probably would suck on the street.

I recommend Eibachs from our earlier discussion, or the S-techs. Those are known quantities for me.

Thanks!
The question is has anyone done a change from Eibach to Tein-S or the other way and noted differences?