PDA

View Full Version : Adhesive for dash repair?



MADMarc
04-28-2012, 08:04 PM
For those of you who have repaired your lifted dash or panels, what adhesive did you use? Does anyone have recommendations which glue I should use? I checked out the 3M spray adhesive, but spraying is too imprecise and I need something that I can get into the little crevices where the vinyl/foam has lifted.

2fnloud
04-29-2012, 12:55 AM
where are you trying to glue, I was able to glue my pad down around my seat switch in the center console. If I never told you, you would not even know.

MADMarc
04-29-2012, 04:26 PM
I want to do the part where it is lifting @ the dash vents, as well as the glove box lid (+other misc little spots). That seat switch would be one of them :) I know I remember seeing a picture walkthrough of someone doing the repair before reinstalling dash vents, but I can't remember it, nor can I find ideas of the right adhesive to use. Damn CA heat does a number on car interiors :(

2fnloud
04-29-2012, 10:48 PM
I used CL glue but it is very runny, you need to be really careful then I used the black binder clips to hold it down.

MADMarc
04-30-2012, 11:56 AM
Funny is fine if it does the job well :) sounds like you haven't had any problems. How long ago did you do it?

DrGonzo
04-30-2012, 01:20 PM
Amazing Goop and black binder clips. Has been holding strong now for 4+ years.......

MADMarc
05-01-2012, 12:27 AM
Ooooo, amazing goop. I will be ordering that soon, anyways. Can't wait to get my dash fix on!

Nihil
05-01-2012, 03:07 AM
Stealth-316 Never fails! (http://www.stealth316.com/2-defrgarnish.htm) There's a bit of info on there, but it sounds like you've gotten things figured out, figured I'd share the link/info anyway though :)

MADMarc
05-02-2012, 03:23 AM
I couldn't find that page! Thanks, Nihil!

blackandblu
05-07-2012, 07:44 PM
AG Automotive Product Information 0709 (http://www.biosafe-inc.com/Automotive.htm)

Same heat point as the regular " all-Purpose" Goop