View Full Version : Oil Cooler Banjo Bolt Size.
blindmist
09-20-2010, 04:36 PM
Does anyone know the size of the oil cooler banjo bolt? Thread pitch and all?
I am trying to find another one because I lost one. My car is sitting until this is fixed. If you have a spare, shoot me a PM and I'll buy it off ya.
skyrunner
09-20-2010, 04:42 PM
I don't know about the oil cooler, but if it is the same size as the oil feed line on the front turbo, that is a 10x1.25... Just guessing that might be the same size. Don't know about length though. Last time I broke one, I just made a replacement (even drilled it by hand, but I would suggest using a press if I had to do it again)...
blindmist
09-20-2010, 04:45 PM
I don't know about the oil cooler, but if it is the same size as the oil feed line on the front turbo, that is a 10x1.25... Just guessing that might be the same size. Don't know about length though. Last time I broke one, I just made a replacement (even drilled it by hand, but I would suggest using a press if I had to do it again)...
No, it is not the same, but very interesting you made your own. lol
blindmist
09-20-2010, 05:06 PM
NVM, I got one.
Monster Stealth
09-20-2010, 05:23 PM
For future reference the oil cooler and oil filter housing both are 16mm x 1.5 Metric.
blindmist
09-20-2010, 05:27 PM
Mark this one in the books for searching! Thanks Monster!
Just migrated a bit of info:
http://www.3sgto.org/showthread.php?842-Metric-Thread-Sizes-%28and-AN-adapters%29
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.