PDA

View Full Version : wiring in a tps for a throttle body



keo92stealth
03-29-2012, 03:33 AM
im trying to figure out the wiring for the tps on the factory harness so i can wire in my tps for my bigger throttle body. is anybody here using a mustang 75mm tbody? if so, help me out. thanks

keo92stealth
03-29-2012, 09:31 PM
bump bump

J. Fast
03-30-2012, 01:40 AM
Post pictures of throttle body and the harness socket

Unknownvr4
03-30-2012, 04:31 AM
Stealth316 doesn't have this info? Im not looking up which is what right now but I believe it's a hot, 5v reference, and ground.

Unknownvr4
03-30-2012, 09:12 AM
Googled it. Stealth316 doesn't have it.

Re: TPS Wiring

--------------------------------------------------------------------------------

pin 1 -- 5v ref
pin 2 -- tps signal out
pin 3 -- position switch
pin 4 -- sensor ground

keo92stealth
03-30-2012, 04:20 PM
yea i know what our tps wires are. i was wondering if anybody here used a mustang tps and knows there wiring. i cant find it anywhere. i also know that ours have 4 wires and the mustang has only 3.