View Full Version : Wanted evo maf
Chris@Rvengeperformance
03-28-2012, 10:57 AM
Hey fellas I'm looking for an evo maf and harness.
Chris@Rvengeperformance
03-28-2012, 11:54 AM
nevermind got one
Monster Stealth
03-28-2012, 12:02 PM
Did you find a PnP harness or get a clipped one?
Chris@Rvengeperformance
03-28-2012, 12:04 PM
still looking for that
Monster Stealth
03-28-2012, 12:11 PM
still looking for that
Let me know if you find anything PnP. What are you doing for the EVO MAF in the stock bubble? Most people cut up a hockey puck, and do some fancy work. I was planning on just buying a 4" SS silicone joiner and a 3.25" to 4" silicone adapter for the MAF. I know the ARC2 guys with the 4" MAF just shove it in the stock bubble and clamp it down, so hopefully that works.
Turbo Piping (http://www.siliconeintakes.com/product_info.php?cPath=9&products_id=381&osCsid=9220c7fa913a059f77c5bbf872f74445)
Pipe Reducer (http://www.siliconeintakes.com/product_info.php?cPath=2&products_id=537&osCsid=5b235678927de1630f6f4e4faa90a8cc)
Chris@Rvengeperformance
03-28-2012, 12:17 PM
I picked up a pigtail for $10 off ebay. The plug and play stuff is a lot of money for a little connector and the side that joins with the factory harness is a little shady, like the maft connector. I'd rather solder the wires and be done with it.
I was planning on the hockey plug thing, but your idea isn't bad, we'll see what it looks like when I get it here.
I did have a 3.75" maf just shoved into the stock bubble. It is possible that a simple round adapter could be used. Even the hardware store may have something usable.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.