PDA

View Full Version : Disassembly: Speed Limit



Greg E
03-26-2012, 10:07 PM
I was going to leave this out of v2 but it occurred to me that this might be handy. Say you're leaving your car with a friend or a mechanic and you don't trust them with your car. :lol:

The speed limit function is disabled by default, but it can be enabled via Periphery0 Bit6. There is another function to this bit as well, but I'm having trouble figuring out what is going on. It appears the speed limit operates just like the rev limit where it cuts fuel AND spark and I believe this is the other sub enabled with this bit.

http://i.imgur.com/QAvel.jpg

The values you see here are the stock ones already programmed in memory.

To test this I set the Enable speed to 20mph and the Disable speed to 15, then gave my car to the inspection guys. Here in PA, state inspections are done with private garages. Now, all they were supposed to do was drive the car from the parking lot into the garage, hook up the OBD computer, then slap the sticker on it. Well... I got a phone call during the day about my car having a "problem" where it cuts out at 20mph and nearly caused an accident.

My reply was "How do you know this?" :lol:

ChargerX3
03-27-2012, 02:34 AM
Would be awesome to automatically set this without having to reflash, but im not sure how you could do that.

MR2
03-27-2012, 04:39 AM
I love that, I'm going to ask my tuners to give me a switch for that too!

BigTyla
03-27-2012, 02:46 PM
Brilliant!

Greg E
03-27-2012, 03:24 PM
Would be awesome to automatically set this without having to reflash, but im not sure how you could do that.


its not that hard but we only have a few inputs and I'd rather leave them for something else.

Toni
03-27-2012, 06:23 PM
Speed is just a frequency input. It would be fairly easy to come up with an external device that handles limitation. Not sure I'd feel safe with it though in case it accidentally activates. Although solid state hardware once written correctly doesn't fail that often.

stealthee
03-27-2012, 07:10 PM
Hey Greg, as part of PA state inspections they are technically supposed to take it for a drive to make sure everything is alright. I've only ever had my car taken for a drive twice, as most garages ignore that part, but it is actually what is supposed to be done.

Greg E
03-27-2012, 07:53 PM
Hey Greg, as part of PA state inspections they are technically supposed to take it for a drive to make sure everything is alright. I've only ever had my car taken for a drive twice, as most garages ignore that part, but it is actually what is supposed to be done.

Got my sticker without the joyride. :lol:

BigTyla
03-27-2012, 08:23 PM
Hey Greg, as part of PA state inspections they are technically supposed to take it for a drive to make sure everything is alright. I've only ever had my car taken for a drive twice, as most garages ignore that part, but it is actually what is supposed to be done.

I would NEVER go for that.

green-lantern
03-27-2012, 08:34 PM
My reply was "How do you know this?" :lol:

:lmao: ........................

ChargerX3
03-27-2012, 08:58 PM
its not that hard but we only have a few inputs and I'd rather leave them for something else.

Think of it as an options package. Some may want V2.1.0.2.

terrets
03-28-2012, 12:13 AM
Great feature. Although I would never take the VR4 to a mechanic and sure as shit never let anyone drive it without me in the passenger seat.. If I ever let anyone drive it...

Thats pretty funny though hahaha

J. Fast
03-28-2012, 12:48 AM
I was going to leave this out of v2 but it occurred to me that this might be handy. Say you're leaving your car with a friend or a mechanic and you don't trust them with your car. :lol:

The speed limit function is disabled by default, but it can be enabled via Periphery0 Bit6. There is another function to this bit as well, but I'm having trouble figuring out what is going on. It appears the speed limit operates just like the rev limit where it cuts fuel AND spark and I believe this is the other sub enabled with this bit.

http://i.imgur.com/QAvel.jpg

The values you see here are the stock ones already programmed in memory.

To test this I set the Enable speed to 20mph and the Disable speed to 15, then gave my car to the inspection guys. Here in PA, state inspections are done with private garages. Now, all they were supposed to do was drive the car from the parking lot into the garage, hook up the OBD computer, then slap the sticker on it. Well... I got a phone call during the day about my car having a "problem" where it cuts out at 20mph and nearly caused an accident.

My reply was "How do you know this?" :lol:

"Brilliant" x 2. Haha, nice feature!