View Full Version : FWD questions about putting a tt awd tranny in sl
Desperado
03-19-2012, 09:31 PM
Long story short I've ran a tt engine in a sl for about 5 years. I blew the engine and was debating on going back to n/a hyst becouse of gas prices and it was hard on my tranny. But after several ppl talking me into putting another tt engine in I'm contemplating on putting a 6 speed awd in. I've heard some ppl say you need to get the 6-spd shifter assembly and cables. The 2 things I'm most not sure of is the VCU issue and what do ppl do about the speedometer, I know its different
it was "hard" on the tranny because the n/a mtx transmissions are built from balsa wood and glass. i dunno about the speedo, but if memory serves, you either weld the VCU or you weld the planetary gears. we do finally have VCU replacements available, so welding that isn't as taboo as it used to be. that said, if you can swap a working one with someone who has a fried one, that's probably the easiest method.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.