PDA

View Full Version : Wanted Kunuckles!!



Uniuno
03-09-2012, 06:38 PM
Upgrading my base model front brakes to those of the VR4 variety.. I already have the second gen calipers and rotors, just need the knuckles.. I don't believe I need to change the bearings/hub so how much for the front knuckles shipped to 48307?

Not looking to spend a fortune either, a lot of these cars are being parted out, should be plenty around.

Thanks!

R/T93
03-09-2012, 08:07 PM
You need TT hubs and bearings, I also recommend TT steering tie rod ends. Can get them cheap from NAPA

Sent from my ADR6350 using Tapatalk

stealthee
03-09-2012, 08:56 PM
If you are doing this just to do it then you are wasting your time, money and effort. TT brakes, means TT rotors, which means if you are still NA your slow car will be even slower.

R/T93
03-09-2012, 09:00 PM
I dissagree, TT brakes and good pads were the best mod to my r/t.

Hans@GZP
03-09-2012, 10:05 PM
$240 shipped for front steering knuckles with wheel hubs and outer tie rod ends.

bassrr94
03-09-2012, 11:19 PM
ill outprice anyone, i have n/a knuckles off a 94 sl. send me a photo of what u need exactly

R/T93
03-10-2012, 12:51 AM
he is looking for TT knuckles/hubs

Uniuno
03-10-2012, 12:16 PM
If you are doing this just to do it then you are wasting your time, money and effort. TT brakes, means TT rotors, which means if you are still NA your slow car will be even slower.

Umm yeah.. My car is turbo, I guess I need to add a sig.. and I know they are about 4 pounds heavier per side, but I need them


$240 shipped for front steering knuckles with wheel hubs and outer tie rod ends.

Hans, any of those parts new?

Thanks

Hans@GZP
03-10-2012, 01:24 PM
Parts are not new, but they are in good working shape. New hubs are $80 each by themselves.

Hans@GZP
03-10-2012, 01:27 PM
ill outprice anyone, i have n/a knuckles off a 94 sl. send me a photo of what u need exactly

The key to being able to outprice anyone is the ability to send them the correct parts. So, sometimes it's best just to buy from someone who knows what the customer needs.