View Full Version : What is this stuff inside my strut boot?
Swapping out OEM suspension w/Eibach's from my donor/project. While cleaning up the Eibach assemblies, I noticed this stuff crumbling inside the strut boot. Is it what's left of the "stop"? Do I really need it? If so, what do I replace it with?
876
Austin@STM
09-19-2010, 01:11 PM
Yup that is the stop, its not absolutely neccesary, but i would recommend putting one back in there. The struts you take the springs off of should have a set the comes with the eibach springs.
-Austin@STM
Thanks...this is what was in the assemblies I am swapping into my TT.
Can't imagine they would ever really do any stopping....unless they deteriorated immensely.
Are there replacements available? Alternatives?
green-lantern
09-19-2010, 01:36 PM
Yup that is the stop, its not absolutely neccesary, but i would recommend putting one back in there. The struts you take the springs off of should have a set the comes with the eibach springs.
-Austin@STM
This, If you don't have it and hit a bad bump it will be metal against metal. bang
Austin@STM
09-19-2010, 02:16 PM
Thats why i recommend putting them back in there. ;)
DV8 if you are interested in a new set i can call eibach in the morning and see if they sell replacements. The eibach and other spring sets usually come with a new set to work with the lower springs. So im sure they must are available.
-Austin@STM
Found them at Summit. (http://www.summitracing.com/search/Brand/Eibach/Product-Line/Eibach-Bump-Stops/?autoview=SKU)..25ea....ouch. This elastomer material seems too soft and obviously doesn't hold up well ...wouldn't rubber do better?
green-lantern
09-19-2010, 05:53 PM
Is that for one or two?
each...per wheel...as in (1)
Austin@STM
09-20-2010, 01:28 AM
I will should be able to get you a better price on them, i will find out in the morning.
-Austin@STM
Jimvr4
09-20-2010, 01:39 AM
OEM bump stops are about $10 from Cherry Hill
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.