View Full Version : modular front motor mount for those who have larger turbos
Seattle92VR4
02-15-2012, 02:35 PM
I'm working on a modular motor mount bracket system for those who have larger turbos and have clearance issues with the drain tube. For those who have have done this or have had issue please clime in and post pics. I know that some people have talked about having to cut part of the bracket away to make run. I would like to rectify this issue! :) Thanks
thor'svr4
02-17-2012, 09:34 PM
sorry if im way off, but do you mean something like this? im not sure what you mean when you say a 'modular motor mount'.
initially i had to cut the motor mount this much to get it to work with my 13T's WRX housing. Due to the amount of material taken out i didnt trust the mount anymore.
http://i366.photobucket.com/albums/oo110/streetracer4688/mounttogether.jpg
so i decided that i really didnt need to notch the mount, but rather make it skinnier. so this was my solution
http://i366.photobucket.com/albums/oo110/streetracer4688/mountcut.jpg
notice that by cutting the mount i actually made it around 1/4-3/8" narrower which was plenty even for the bulky WRX housing. (look closely at the distance between the edge of the mount and the 3 bolt holes in the first pic and again in the 2nd pic
http://i366.photobucket.com/albums/oo110/streetracer4688/mountpaintedgusset.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/mountfullpainted.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/mountside.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/circlemountwelded.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/mountrough.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/mountpaintedtogether.jpg
http://i366.photobucket.com/albums/oo110/streetracer4688/mountcirclepainted.jpg
stock hardware up top and the grade 8 bolt i used to replace it
http://i366.photobucket.com/albums/oo110/streetracer4688/stockhardwear.jpg
Kx1984
03-05-2012, 10:50 PM
hmm thought there would be more interest in this
kx
anyonebutme
03-06-2012, 12:35 PM
None of us run JPDC or whatever TD05 adaptors, which is what this whole problem originated from. The later kits came with a billet motor mount bracket that solved the oil drain clearance issue, IIRC. The 13t's interfere with the U bracket, but a slight thinning is more than enough to clear them, you don't even have to cut any of it away.
Chris@Rvengeperformance
03-06-2012, 05:51 PM
that's weird, my 13t's cleared just fine.
anyonebutme
03-06-2012, 10:36 PM
that's weird, my 13t's cleared just fine.
My turbo cleared.....the silicone coupler rubbed.
Chris@Rvengeperformance
03-06-2012, 11:36 PM
My turbo cleared.....the silicone coupler rubbed.
I guess our engines were in slightly different places, I didn't have any issues.
Monster Stealth
10-11-2012, 08:40 PM
Bump????
DuTTch
10-11-2012, 11:20 PM
My 19T same problem,coupler was hitting the bracket big time, I put a 90 degree coupler on it instead, modified the IC pipe and hope for the best flow wise.
http://i156.photobucket.com/albums/t26/duchguy/coupler.jpg
J-Groove
10-12-2012, 10:37 AM
Wow, this I would buy today if available!
Actually I would need it today since I'm bolting my turbos back on tomorrow. haha
-John
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.