View Full Version : Gates Racing Timing Belts now available at Maximal
Maximal
02-03-2012, 02:08 PM
Just added it to the site. 300% stronger than stock for just a bit more than the OEM belt at the discount dealers and a ton cheaper than the Kevlar option.
Engine - Gates Racing Timing Belt - DOHC 6G72 - Maximal Performance (http://www.maximalperformance.com/store/gates-racing-timing-belt-dohc-6g72/prod_271.html)
Haven't got my stock shipment yet but my supplier can ship these direct so consider them in stock.
Trevor
02-03-2012, 05:41 PM
I haven't dug into their catalog...is there a 6G74 belt too?
Maximal
02-03-2012, 05:50 PM
I haven't dug into their catalog...is there a 6G74 belt too?
Unfortuantely it doesn't look like there is.
Sin'sVr4
02-03-2012, 06:39 PM
I NEEEEED one of these...ugh....so much to do..so little money. (plus wife will chop my other nut off)
:pirate: she has the other in a jar on her night stand...lol....jk...no really
Maximal
02-03-2012, 07:05 PM
Well whenever your wife releases those nuts let me know. :p
how about a 6g75 one! :p (eclipse or Montero 3.8 ?)
Alex3000gt
02-03-2012, 11:05 PM
What is the weight of this belt vs stock? Just curious.
Granny
02-03-2012, 11:10 PM
Are these belts recommended replacement more then stock?
Maximal
02-04-2012, 09:13 AM
how about a 6g75 one! :p (eclipse or Montero 3.8 ?)
Nope. :( They just have a standard belt for that application (as they do for the 74).
What is the weight of this belt vs stock? Just curious.
I'm not positive but I would guess it wouldn't be noticeable. I can weigh it once I get my order for stock.
Are these belts recommended replacement more then stock?
I would say so. Not only are they stronger than stock but they're from a reputable company like Gates so I tend to believe them. I can tell you I've never put anything but an OEM belt on my car and the next timing belt I put on it will be this one.
aaronatstate
02-05-2012, 11:22 AM
Being a Synchronous Process Engineer for Gates, I can tell you these belts are better than OEM. They are made at our facility in Japan, which is also where the OEM belt were/are made, so it's made with the exact same tooling.
And just so you know Terry, it is a Kevlar reinforced belt. It has Aramid fibers in the rubber. The construction of our Racing Belts are second to none. They have the Kevlar fibers in the rubber, super strong nylon jacket on the tooth, plus they have a super strong tensile cord in it as well.
I too plan to replace my timing belt with this belt the next time around.
Maximal
02-05-2012, 11:47 AM
Being a Synchronous Process Engineer for Gates, I can tell you these belts are better than OEM. They are made at our facility in Japan, which is also where the OEM belt were/are made, so it's made with the exact same tooling.
And just so you know Terry, it is a Kevlar reinforced belt. It has Aramid fibers in the rubber. The construction of our Racing Belts are second to none. They have the Kevlar fibers in the rubber, super strong nylon jacket on the tooth, plus they have a super strong tensile cord in it as well.
I too plan to replace my timing belt with this belt the next time around.
To be honest I thought it might have been a Kevlar belt but didn't want to mention it as Gates doesn't specifically say that in their description. Plus I know that Gates makes belts for Power Enterprises who makes the Kevlar 3S belt and they do look the same. So basically it's the same thing but $100 cheaper. :)
aaronatstate
02-05-2012, 05:21 PM
To be honest I thought it might have been a Kevlar belt but didn't want to mention it as Gates doesn't specifically say that in their description. Plus I know that Gates makes belts for Power Enterprises who makes the Kevlar 3S belt and they do look the same. So basically it's the same thing but $100 cheaper. :)
Yup pretty much. Also if you ever sell the DSM racing belt (doubt it), those are made on one the lines I'm in charge of, so you know they're good :lol:
Maximal
02-06-2012, 09:52 AM
Thanks for the info Aaron. I almost talked to you before I listed it just to confirm my suspisions on what it was, guess I should have. :p
Maximal
02-22-2012, 02:53 PM
Bump...
Maximal
03-08-2012, 05:40 PM
Sold my initial stock of these already but I can ship these directly from my supplier still. :)
Vantage
03-08-2012, 08:13 PM
Highly recommended. I've been extremely satisfied with mine thus far, and have had zero noise issues as well.
aaronatstate
03-08-2012, 08:16 PM
Hmmm...you know what's quite funny, when I buy one of these, it will travel from Japan, to the warehouse across the street in Arkansas, to your supplier, to you, and then back to me in Arkansas. I should have it shipped to the plant, and then it will end up where it left from :lol:
Maximal
03-08-2012, 08:34 PM
Highly recommended. I've been extremely satisfied with mine thus far, and have had zero noise issues as well.
Good to hear! I'm no where close to needing a timing belt but am thinking about installing this just for the peace of mind.
Hmmm...you know what's quite funny, when I buy one of these, it will travel from Japan, to the warehouse across the street in Arkansas, to your supplier, to you, and then back to me in Arkansas. I should have it shipped to the plant, and then it will end up where it left from :lol:
No employee discount? :p
aaronatstate
03-09-2012, 12:34 AM
Good to hear! I'm no where close to needing a timing belt but am thinking about installing this just for the peace of mind.
No employee discount? :p
Nope, too many people took advantage of it a while back, bastards.
I'm trying to get our product engineers to let me have one as a "test." And I'll give it back when I change it out again, for testing to see how it behaved. No such luck yet :lol:
Maximal
11-07-2012, 04:00 PM
Still available...
Maximal
11-19-2012, 09:34 AM
Just wanted to let you guys know these are part of our "black week" sales: Gates Racing Timing Belt - DOHC 6G72 - Maximal Performance (http://www.maximalperformance.com/store/engine/gates-racing-timing-belt-dohc-6g72.html)
$130...
keo92stealth
11-20-2012, 09:46 AM
Probably need to jump on this since I have a solid tensioner
Maximal
11-20-2012, 11:15 AM
Yep, now's the time. :)
Maximal
02-06-2013, 10:27 AM
Just got another stocking order of these!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.