PDA

View Full Version : Let's talk splitters...(latest project inside)



Erron Spalsbury
02-02-2012, 12:57 PM
Been working on this one for a few months. Without going into all of the theory behind a good splitter here's what I have done. My buddies wife who's into carbon manufacturing and vacuum bagging was kind enough to make a piece for me. It's a multi-layer, over/under wrap with 2k twill carbon with a .250 foam core. It needs to extend beyond the radiator at the very least to create high pressure in front and low pressure behind the radiator to be effective. This does and then some.

http://img13.imageshack.us/img13/2326/cflipspoiler2close.jpg

http://img13.imageshack.us/img13/222/cflipspoiler.jpg

With this front bumper cover, the bottom isn't exactly flat. In fact, the back side skirt area was nearly 2.5 inches than the front leading edge. So keeping the splitter flat would have created a big gap along the front of the cover. I took some thin sheet aluminum and heated it so it would be easily formable around the curve of the bumper. Quinching it quickly with a cold spray would help it keep it's shape. I then glued it directly to the splitter. This does two things. It makes to where it's "floating" with the splitter for vibrations and only the splitter itself is attached to the cover and crossmembers. (also allows for adjustments with the stay rods) Tape, paint, clear, you can see the results.

http://img7.imageshack.us/img7/8152/cflip1.jpg

http://img706.imageshack.us/img706/5746/cflip2.jpg

http://img714.imageshack.us/img714/1132/cflip3.jpg

http://img407.imageshack.us/img407/7681/cflip4.jpg

Ultimately, it needs to be strong. It will be subjected to a tremendous amount of downforce. Sooooo, yeah.....

http://img696.imageshack.us/img696/3864/standq.jpg

Thoughts? Comments? Questions or concerns? Let's hear it. Anyone else make one of these?

MADMarc
02-02-2012, 01:18 PM
Get off it before it breaks! lol

Maximal
02-02-2012, 01:30 PM
Looks awesome and the cleanest splitter I've seen for these cars. Any chance they'll be available to purchase?

Erron Spalsbury
02-02-2012, 02:12 PM
I'm sure she can make more of these, I'll have to ask if she wants to.

green-lantern
02-02-2012, 02:22 PM
Looks great, I'm interested in one. :)

slage
02-02-2012, 02:45 PM
wow that looks clean!!!! sweet :D

Rakuny
02-02-2012, 03:36 PM
looks awesome! I'm gonna be tackling this for my build before the season.. not with carbon though.

I saw a picture from another platform with the car on a lift and a guy doing a pull up hanging onto the splitter, lol gotta test it somehow! A quick search didn't find it sorry :p

MeTarzan
02-02-2012, 03:45 PM
Def looks really clean

Maximal
02-02-2012, 04:04 PM
I'm sure she can make more of these, I'll have to ask if she wants to.

Well if she does and it's somewhat reasonable on the price I'll probably be interested in one. I've been thinking about this for a while but don't really want to go the plywood route.

B-Man
02-02-2012, 04:17 PM
I'd be in, too. I've thought about doing it out of aluminum, but concerns about weight vs strength vs cost.

NOMIEZVR4
02-02-2012, 08:28 PM
Can we get more pictures please? Different angles and from a distance too?

75blackray
02-02-2012, 09:15 PM
Can we get more pictures please? Different angles and from a distance too?
+1

any idea on a price point?

Broomfield Racing
02-02-2012, 09:50 PM
http://img696.imageshack.us/img696/3864/standq.jpg

That is awesome!

anyonebutme
02-02-2012, 11:10 PM
Picture of you standing on it reminded me of Toan's TT car:

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/309884_219994901401231_141515042582551_597781_3372 93224_n.jpg

Somewhere I have a pic of Von standing on the front of the Morgan's Motorsport splitter.

terrets
02-03-2012, 02:45 AM
Interested too.

What front bumper is that?

B-Man
02-03-2012, 08:47 AM
Interested too.

What front bumper is that?

Veilside

MR2
02-03-2012, 08:53 AM
any Vendor looking at this awesome stuff, would you be interested in producing a two piece (so it can actually be shipped internationally) lip that doubles as a splitter? legally splitters get you in the shit in Aussie land but I'd love to have something that does as much of what you can see above, on a 99 front bar.

Erron Spalsbury
02-03-2012, 12:05 PM
We got 18 inches of snow last night so that's about as good as the pics will be for a while. Mine is a one off guys, if she makes these, they would vac bagged and trimmed. The finish work would be up to you. (as in sanded and clear coated)

Price point? No idea. There's about 5 sq yards of carbon in mine, that may give you some idea. Let's see what she says...

bridge
02-03-2012, 12:29 PM
Well if she does and it's somewhat reasonable on the price I'll probably be interested in one. I've been thinking about this for a while but don't really want to go the plywood route.

Hating on the sce and maddog homemade ones?

Does look sweet though

Maximal
02-03-2012, 12:47 PM
Hating on the sce and maddog homemade ones?

Does look sweet though

Haha, not at all. Chances are if this doesn't work out I will go that route. :p

Erron Spalsbury
02-03-2012, 01:23 PM
That's what I was going to do. I know this one will be destroyed at some point, the first time I rocket off the track. Carbon is pretty, a bit lighter than wood, but at the end of the day plywood may be a better option for an "expendable" piece like this. It'll certainly be the difference between 50 bucks and a few hundred.

Just a TT
02-03-2012, 02:28 PM
Erron, what up?!

This looks AWESOME! I want.

Keep us in the loop on price. And would this eliminate the Active Aero?

Erron Spalsbury
02-03-2012, 04:10 PM
What's up man!
Yes, this would totally eliminate the active aero.
That's actually something to discuss. To mount this I welded nuts to the cross member so there would be fab work to get it as strong as mine. You can always just bolt it to the facia, but don't stand on it if you do. :)

Just a TT
02-03-2012, 05:22 PM
Darn...

I love the active aero haha. Well I want to see this thing on your race car at the CU Car Show coming up in April!

ChargerX3
02-03-2012, 06:44 PM
Love to see this made public.

niterydr
02-04-2012, 04:11 AM
Excellent design and execution.

Erron Spalsbury
02-09-2012, 12:18 PM
Alright guys, she said she would make more of these. It would be an impregnated hex core now rather than the foam core. (stronger really, mine is pretty much a prototype) Carbon, 2x2 twill, vacuum bagged of course, comes with turn buckles, would be made on an "as ordered" basis, she's asking $600.

anyonebutme
02-09-2012, 12:41 PM
Does it extend to the axle centerline?

[edit]: forgot there was pictures on the first post, answered.

Erron Spalsbury
02-09-2012, 12:44 PM
Mine does not, but then again I have an incredibly long nose on the car. It goes to about where the front turbo used to be. I'm sure we can get actual measurements.

BigBoris
03-18-2012, 06:29 AM
I am really interested in this but have some questions;

is this being sold as a complete kit or are there other things needed to complete this upgrade?

Will you be able to provide a detailed installation instruction since you have already done it? =p

Where is this place located for shipping and or pick up?

J_Parker
03-18-2012, 04:54 PM
I'm going to be venturing into this soon as well, I want to see if I can make a decent one out of Aluminum. and following a full bottom skin for the rest of the car. Hopefully I can save the bottom of my car from the roads here with it.

Erron Spalsbury
03-18-2012, 09:24 PM
We didn't get much interest honestly, don't think it will happen.

We were talking about just the splitter by itself.

MR2
03-19-2012, 04:18 AM
yeahhh, it's one of those things that's hard to freight around, and there is a legality issue as well :|

I'm contemplating making one that extends out 10cm at speed (just to get around the legality of it)

J_Parker
03-19-2012, 04:56 AM
yeahhh, it's one of those things that's hard to freight around, and there is a legality issue as well :|

I'm contemplating making one that extends out 10cm at speed (just to get around the legality of it)

Having a splitter here is highly illegal so I've been told, but there is a car running around that has had one on it for a couple of years now.

I'm not overly sure why they're claiming them to be illegal, some say because of "dismemberment" in the event of hitting a pedestrian, others say it might fall off. But we'll see when I finish mine.

Erron Spalsbury
03-19-2012, 11:38 AM
That would be the first I've ever heard of any legality issues with body modifications. Are push bars and winches illegal too where you're at? I don't want to get by one of those. either. :P

MR2
03-19-2012, 04:29 PM
not sure what a Push bar is...but we call the big bars on the front of 4x4's (you call them trucks for some reason) bull bars, and yes they are illegal, the actual ruling states basically that any protrusion on the front of a vehicle must not be designed to allow additional damage to any pedestrians.

we now have the equivalent of bullbars made from plastic :p you should see it lol

Erron Spalsbury
03-19-2012, 04:37 PM
I suppose it would have to come with a sticker that says "off road use only" then. LOL!

MR2
03-19-2012, 05:43 PM
You laugh but everything sold at every shop here comes with that warning :p

lparrill
03-19-2012, 06:00 PM
I'd be interested as well

Erron Spalsbury
03-19-2012, 06:30 PM
You laugh but everything sold at every shop here comes with that warning :p

I don't think i've ever bought any aftermarket product that didn't have one. I think that's their way of saying, use at your own risk.

92 3K
04-26-2012, 11:45 PM
100% down to buy this. Love that its on a Gen 1!!

B-Man
05-09-2012, 12:19 PM
Do you have any pictures of how you attached it?

Erron Spalsbury
05-09-2012, 12:25 PM
I don't. In a nutshell, I just welded on nuts where I needed them. I think I used 4 nuts on the back side, somewhat evenly spaced across the back side.

J. Fast
05-09-2012, 12:30 PM
I think it's cool but it doesn't fit your car Err. It's a foot too narrow and it's not deep enough. It looked cool on the Gixxer widebody Jake had it on but it doesn't fit the new nose you've converted to. Personally I think you should sell it and have a new one molded.

B-Man
05-09-2012, 12:33 PM
I don't. In a nutshell, I just welded on nuts where I needed them. I think I used 4 nuts on the back side, somewhat evenly spaced across the back side.

Welded on the subframe?

J. Fast
05-09-2012, 12:50 PM
Back is pinned to nuts welded to the front crossmember and the front is rod hinge pinned back thru the bumper to a reinforced mount he fabricated.

Erron Spalsbury
05-09-2012, 01:18 PM
I think it's cool but it doesn't fit your car Err. It's a foot too narrow and it's not deep enough. It looked cool on the Gixxer widebody Jake had it on but it doesn't fit the new nose you've converted to. Personally I think you should sell it and have a new one molded.

Not at all. It's extended beyond the radiator, which creates the low pressure area that is needed behind the radiator and high pressure in front. (exactly what a splitter is designed to do) The width is moot for my car, (and any car that doesn't have fully enclosed fender wells) they are open fender wells as well as having a turbo on one side that needs air flow for heat management.

B-Man
05-09-2012, 01:47 PM
If you were to make this from aluminum, do you think 1/8" 6061 would hold? What is the overall dimensions on your piece?

Erron Spalsbury
05-09-2012, 01:52 PM
Oh ya, that should hold just fine. There's always the 'stand on it' test.

I'd have to measure it...

B-Man
05-09-2012, 01:56 PM
I'm a little too big to be doing the 'stand on it' test :p

If you get time, please measure it. It's not a big deal, I can measure my bumper and get a general idea.

Erron Spalsbury
05-09-2012, 02:00 PM
Hahahaha, They should be able to handle 4-600 pounds. (especially during undulation)

B-Man
05-09-2012, 02:02 PM
4-600lbs over the entire diffuser, not just one spot the size of my shoe.

Erron Spalsbury
05-09-2012, 02:04 PM
Correct. As in supported in the same areas you would bolt it to the car, then stand in the middle of it.

J. Fast
05-09-2012, 02:14 PM
Not at all. It's extended beyond the radiator, which creates the low pressure area that is needed behind the radiator and high pressure in front. (exactly what a splitter is designed to do) The width is moot for my car, (and any car that doesn't have fully enclosed fender wells) they are open fender wells as well as having a turbo on one side that needs air flow for heat management.

By stopping the spltter at the radiator your essentially letting the pressure escape under the car and inflating a balloon under the car the faster you go instead of redirecting that pressure out the hood. Don't tell me otherwise, I know better...

You're trying to justfy fitting a splitter from a dsm, which is about a foot narrower, on a car it wasn't designed for? Why?

I guarantee if you asked Bob or Dax they would ask you why your inflating a balloon under your car and why the spliiter doesn't extend beyond the tires in the front? Yes, you're directing pressure thru the radiator but all the other reasons for utilizing a splitter are being ignored because you're allowing high pressure under the tires because the splitter is to narrow and doesn't extend beyond the tires. Lastly, your allowing high pressure to escape back under the car which is exacly the opposite of what you are trying to achieve from an aerodynamic standpoint.

I hope you're not offended by my opinion, but don't try to justify it to me Err, I know better.

Erron Spalsbury
05-09-2012, 02:39 PM
Because it works, that's why.
Is your car done yet? We need to out to HPR. :)

J. Fast
05-09-2012, 04:06 PM
Racecar is good, but there's no time to work on it now though because I'm doin' lots of sidework. The way things are lookin I'll have it all paid for by the end of the summer. Don't worry bro, when I get tired of makin money and working I'll play :). I'd love to roll my streetcar with you though, just to see what it can do with slicks. We can do that whenever you want to hit the track and I can break away :D.

Seriously though, you're so talented at making carbon and glass parts, why don't you revamp that thing?

Erron Spalsbury
05-09-2012, 05:10 PM
I'm tired of working on it. Season starts the 26th of this month.

jeremyr
09-13-2012, 02:11 AM
is she open to making more? I'm extremely interested