PDA

View Full Version : Bunch of New Parts on the Site.



Maximal
01-25-2012, 09:52 AM
Just wanted to give you guys a heads up that I have added a fair amount of new parts to the site over the past week or so. New product lines include Tein, Defi, DBA, ARP, Addco, Corbeau, and Walbro. Lots of new products from existing lines I already had on there too. Right now I'm working on getting gauges added and will probably have the biggest selection of any 3S vendor once it's done (adding gauges is a pain).

If you guys need a part you don't see let me know and I'll get it added because chances are I carry it and if not I can get it.

Site: Maximal Performance (http://www.maximalperformance.com/store/)

Also, as I add the parts I've been posting it up to facebook so check that out too: Maximal Performance | Facebook (http://www.facebook.com/MaximalPerformance)

green-lantern
01-25-2012, 10:43 AM
Very cool :bigthumb:

Alan92RTTT
01-25-2012, 01:41 PM
Nice..

B-Man
01-26-2012, 08:54 AM
How 'bout some setrab oil coolers? :D

Maximal
01-26-2012, 09:19 AM
How 'bout some setrab oil coolers? :D

Just the cores or a whole kit? I was working on a kit using a different core however I went a little crazy with the sizing and it's going to be tricky to fit in the stock location.

B-Man
01-26-2012, 10:48 AM
Just a front mount core.

Maximal
01-26-2012, 10:54 AM
As of now I don't have a supplier that carries Setrab but I'll look into it. I can get Afco though who also makes a quailty core...that's what I'm running on my car and have been pretty happy with it.

B-Man
01-26-2012, 11:02 AM
Sure, if you wanna look that up for me. Turns out I actually asked you about a Setrab before :lol:

Maximal
01-26-2012, 11:14 AM
8x11x1.5 or 11x11x1.5?

I don't have my price sheet with me but I'm thinking around $80 and $100 respectively by the time you get shipping involved. I'm running the 8x11 in the stock location (barely) and it handles my cooling pretty well. I actually think I have one of those in stock right now as it's what I was using to mock up the SMOC I was working on.

B-Man
01-26-2012, 11:23 AM
I was thinking 16"x6" ish. Seems an uncommon size. Trying to do similar to Phil's: http://www.supercar-engineering.com/rubberducky/3S/Mods/TT/BAFMOC/index.html

Maximal
01-26-2012, 01:25 PM
I'll see if I can dig any decent cores up around that size...or just try to carry Setrab.

Maximal
01-26-2012, 05:18 PM
Defi CR, Stri DSD-CS, and Xline are now on the site. :)

aaronatstate
01-27-2012, 08:40 PM
Can you get the new 400lph Walbro pump?

Maximal
01-28-2012, 12:15 AM
Should be able to, I'll look when I'm on a computer next.

Maximal
01-28-2012, 12:23 AM
Got bored and dug it up on my phone. I can get them, probably around $135. I'll add it to the site next.

CoopKill
01-28-2012, 02:32 PM
AWD Sway bars?

Maximal
01-28-2012, 04:08 PM
AWD Sway bars?

Unfortunately I can't get those.

Maximal
01-28-2012, 06:43 PM
Fuel Pump is added: Fuel - Walbro 400lph Fuel Pump - Maximal Performance (http://www.maximalperformance.com/store/walbro-400lph-fuel-pump/prod_226.html)

CoopKill
01-28-2012, 06:50 PM
What all would be needed to use that beast?

Maximal
01-28-2012, 06:54 PM
What all would be needed to use that beast?

Well it will wire up like any other universal pump, manually and connect in with some hose clamps. However you'll probably need to upgrade your stock fuel pump wiring since it's draws some serious power and upgraded feed and return lines (which you probably already have if you need this anyways).

Maximal
01-28-2012, 10:34 PM
AEM's gauges (analog and digital) are now on the site...


BTW Brian, I'm working on getting setup to deal Setrab. :)

Rakuny
01-29-2012, 08:10 PM
Awesome!

btw, I will be getting some STRI gauges from you in a couple months

FeaRpb
01-29-2012, 08:46 PM
Are you going to get any Advance BF with imperial units of measurement?

Maximal
01-30-2012, 09:33 AM
Are you going to get any Advance BF with imperial units of measurement?

Doesn't look like they list imperial gauges in that series anymore.

Maximal
01-30-2012, 09:35 AM
Awesome!

btw, I will be getting some STRI gauges from you in a couple months

Sweet. Just let me know when you're ready. :) They are an awesome gauge. It's one of those lines I bought for my own car from another shop and liked them so much I started carrying them.

FeaRpb
01-30-2012, 11:26 AM
Does Defi have any 60mm Imperial gauges that use Defi-Link?

R/T93
01-30-2012, 11:58 AM
I love my advance CR's. BF's are cool but they are bugeyed, the lens is convex, not the look for some.
Great additions, Terry.

Maximal
01-30-2012, 12:44 PM
Does Defi have any 60mm Imperial gauges that use Defi-Link?

Nope, all their stuff but the Racer Series is metric and of course that doesn't use the Link.

aaronatstate
01-30-2012, 10:40 PM
Well it will wire up like any other universal pump, manually and connect in with some hose clamps. However you'll probably need to upgrade your stock fuel pump wiring since it's draws some serious power and upgraded feed and return lines (which you probably already have if you need this anyways).

From the research I've done it doesn't appear to draw that much more, if any then a regular 255 walbro. Also, from what I understand it uses the same connector as the 255 so if you have one already it should be fairly painless and brainless to install.

I'm thinking I'm gonna try E85 with it and the Evo 560s :w00t:

Maximal
01-31-2012, 11:17 AM
From the research I've done it doesn't appear to draw that much more, if any then a regular 255 walbro. Also, from what I understand it uses the same connector as the 255 so if you have one already it should be fairly painless and brainless to install.

I'm thinking I'm gonna try E85 with it and the Evo 560s :w00t:

Sounds like you've done a bit more research than me. :p. If the connector is the same then the harness form the install kit should at least work, right?

aaronatstate
01-31-2012, 07:41 PM
Sounds like you've done a bit more research than me. :p. If the connector is the same then the harness form the install kit should at least work, right?

It would appear it is not the same, but it shouldn't be that hard to hook up anyway. A friend running it said its 100% quiet, and not quiet for a Walbro, quiet as in can hear the fuel flowing in the lines over the pump running quiet.

And actually the current draw is more, by about 4 amps, but if you have your fuel pump hotwired already, it shouldn't matter like you said.

aaronatstate
01-31-2012, 07:59 PM
This pump is wicked, it flows over 255 lph up to around 85psi of rail pressure. That means one pump can support 750cc ish injectors...

http://www.enginebasics.com/Product%20Tools/images/Walbro%20400lph%201.png

Maximal
01-31-2012, 09:34 PM
Yeah, from what I hear it's one of the more popular pumps for big builds now, just a matter of time before we see them in 3Ss hopefully. :)

Maximal
02-01-2012, 11:47 AM
Just added some CXRacing parts as we just picked up that line yesterday. Check out the intake, cooling, and intercooler sections.

DrGonzo
02-01-2012, 01:40 PM
Terry - Might be good to add a "New Products" Link on your Store front so people can easily see what you have just recently added.


Also You may want to check which version of the CX-Racing hard pipe kit they are shipping. Your picture shows the old Version 1 kit. The one I had delivered a couple weeks ago is the newer version which eliminates that stupid S shaped drivers side hose and the rear turbo pipe is now two pieces for better fitment. Yours is priced for the later version kit. The version 1 kits they are trying to get rid of "Cause they fit like ass" and seriously dropped the prices on them.

Maximal
02-01-2012, 01:43 PM
Terry - Might be good to add a "New Products" Link on your Store front so people can easily see what you have just recently added.


Also You may want to check which version of the CX-Racing hard pipe kit they are shipping. Your picture shows the old Version 1 kit. The one I had delivered a couple weeks ago is the newer version which eliminates that stupid S shaped drivers side hose and the rear turbo pipe is now two pieces for better fitment. Yours is priced for the later version kit. The version 1 kits they are trying to get rid of "Cause they fit like ass" and seriously dropped the prices on them.

That's a good idea on the new products...I'll have to check if the software is capable of that.

As for the hardpipe kit it is the new version...they just haven't updated their pics yet so I don't have access to a newer one...

Maximal
02-01-2012, 01:47 PM
And the new products on the homepge was as easy as a checkbox.... :p

DrGonzo
02-01-2012, 02:41 PM
I figured it would be....LOL

Maximal
02-01-2012, 02:56 PM
Yeah, it doesn't look super clean but it make sense for at least the immediate future with all the new additions to the site.

DrGonzo
02-01-2012, 04:29 PM
Might want to try and move the New Products box on top of the updates/news. It will flow better with the store.

Drop me a line sometime and I'll work on spicing up your site for ya!! No offence but it is kind of Bland....:)

Maximal
02-01-2012, 04:34 PM
Might want to try and move the New Products box on top of the updates/news. It will flow better with the store.

Drop me a line sometime and I'll work on spicing up your site for ya!! No offence but it is kind of Bland....:)

Yeah, I like the simple look but a little bling never hurts. I'm actually a version behind on the software I use so I'll probably upgrade that soon (been working on these new parts for now) then see what that allows me to do and go from there.

I'm decent with the code on getting it to work how I want if I need to change something a bit but I suck at the graphical side of things...

Maximal
02-02-2012, 03:28 PM
Just added KSport so check out the site for coilovers and BBKs.

Bryan - I'm working out the final details with Setrab and should have an account with them soon. If you're still interested in the core let me know exactly what one you want and i'll get you pricing.

DrGonzo
02-02-2012, 03:46 PM
What about an upgraded oil line kit?

My stock oil cooler is still good to go but my lines have seen better days. One is kinked pretty bad and the fittings are a little wet "Not Dripping" So they will need some attention here soon. I want to go steel braided lines and black fittings. What can you come up with??

Trying to stay under the $100.00 mark also for lines and fittings!!!

Trevor
02-02-2012, 03:51 PM
Nice pricing on the Corbeaus! I ordered a set of A4's to replace my aging GTSII's. ;)

Maximal
02-02-2012, 04:06 PM
What about an upgraded oil line kit?

My stock oil cooler is still good to go but my lines have seen better days. One is kinked pretty bad and the fittings are a little wet "Not Dripping" So they will need some attention here soon. I want to go steel braided lines and black fittings. What can you come up with??

Trying to stay under the $100.00 mark also for lines and fittings!!!

I'll be making bolt on kits so line kits will probably be available also. not sure on pricing yet but I do know those fittings and line adds up quickly.


Nice pricing on the Corbeaus! I ordered a set of A4's to replace my aging GTSII's. ;)

Got it. The order will be with Corbeau before the end of the day and I'll let you know when they ship. Thanks!

Maximal
02-08-2012, 12:03 PM
Bump...KYB is now added.

Maximal
02-22-2012, 02:53 PM
I have an account setup with Southbend so their clutches will be on the site soon. :)

Maximal
04-27-2012, 09:23 AM
Redline fluids are now added.

Trying to get back into the swing of adding things regularly again...

Maximal
05-31-2012, 05:03 PM
Just added RC Enginnering and Deatschwerks injectors and Wiseco pistons...

Maximal
06-05-2012, 01:35 PM
Ferrea valves/springs/etc are now up!