A Few More Parts To Clear Off the Shelf

[Austin@STM]

Trying to get some money together so getting rid of some more parts i've had on the shelf. All prices are OBO, im not sure what they are all worth.

Paypal is Thebird65@aol.com

First one to send payment gets the part, any questions please post or PM me. Feel free to make offers.

Maximal Performance Solids Mounts, just the driver and passenger side mounts. Only a year old, worked great, but wont be needing them any more. $70 - SOLD

http://hphotos-sjc1.fbcdn.net/hphotos-snc7/381403_2995975386699_1481643354_33130790_693619491 _n.jpg

92 Rt/TT manifold, was going to be polished so i shaved the letters off. Other then that it is completely untouched - $ make an offer

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/393529_2995968586529_1481643354_33130787_141771182 9_n.jpg

92 RT/TT lower manifold, very clean - $ make an offer

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/394426_2996000867336_1481643354_33130805_540435449 _n.jpg

DOHC Intake spacer from 3SX - $25

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/405564_2995998107267_1481643354_33130804_182272619 5_n.jpg

Full set of DOHC coils, all stainless hardware. about 80k on the coils - $60

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/387943_2995995467201_1481643354_33130803_170841716 8_n.jpg

DOHC upper and lower accesory belt pulleys, no noises at all.
Upper pulley $30 Lower Pulley $60

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/374804_2995993347148_1481643354_33130802_427464195 _n.jpg

OEM crank pulley less than a year old, about 7k miles on it. Good as new. - $200

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/407125_2995990987089_1481643354_33130801_166886415 3_n.jpg

Alternator from DOHC if it makes a differnece, 80k miles on it, still charged strong when it was pulled.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/375254_2995987346998_1481643354_33130798_773651302 _n.jpg

Starter from a 92 TT 5 speed, works great, $50

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/409457_2995981506852_1481643354_33130794_168256440 5_n.jpg

2g DSM Brake master cylinder, good for a driver side intake manifold setup, gives a bit of extra clearance with the resivoir in a different spot. $40

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/403816_2995971306597_1481643354_33130789_162323890 6_n.jpg

[Austin@STM]

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/386134_2995965786459_1481643354_33130781_605569442 _n.jpg

92 TT ABS Pump, all threads are perfect, worked when removed - $50

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/408848_3000946110964_1481643354_33132414_883736249 _n.jpg

92 passenger side window regulator, works great. $90

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/394730_3000944390921_1481643354_33132413_184728265 9_n.jpg

92 TT active exhaust motor, looks like new the cable is cut but the motor was good.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/396335_3000942670878_1481643354_33132412_475787792 _n.jpg

Cruise control motor and vacuum "solenoid" all in perfect working order - $25

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/396934_3000938230767_1481643354_33132410_174807874 1_n.jpg

A/C pump about 60k on it, worked great when on the car -$50

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/396860_3000931270593_1481643354_33132406_214031084 _n.jpg

A/C condensor, almost no bent fins, very clean and looks like new - $40

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/387759_3000929030537_1481643354_33132405_156627434 2_n.jpg

Ebay TT y-pipe with new coupler and t-bolts $45

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/315886_2506946481282_1481643354_32872111_882946264 _n.jpg

Sunroof crank handle, works like new. - make an offer $

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/383673_3003322610375_1481643354_33133510_461253838 _n.jpg

Digital climate control box, all lights and buttons work. Missing top tab. - SOLD

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/391796_3003320530323_1481643354_33133509_115419828 4_n.jpg

[Austin@STM]

1st Gen VIS Racing carbon fiber hood, already drilled for hood pins, and will include a full new set. Also have the strut covers for it, just not installed in picture. - Make an offer $

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/376052_3003335650701_1481643354_33133517_84671014_ n.jpg

Stock struts with Intrax lowering springs, bought off another forum member just to roll my car around on - Make an offer - SOLD

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/395340_3003333290642_1481643354_33133516_642424237 _n.jpg

Factory TT center guage cluster, all guages and lights worked. - $30

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/380044_3003327450496_1481643354_33133512_155209389 5_n.jpg

Main guage cluster from a tt, all guages and lights worked - make an offer $

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/393362_3003831463096_1481643354_33133647_173328522 3_n.jpg

Clutch Masters Stage 7 850 series twin disk. Fresh rebuild with 0 miles. Has new unsprung race disks, and floater plates. The flywheel and pressure plate were resurfaced to make the proper stack height. This is the 8.5'' version, not the 7.25'' which is the reason for the price tag, but also means it can old a lot more power. This clutch $2200 new looking for $1700 out of it

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/189235_2250034458642_1481643354_32610535_3917918_n .jpg

All parts of the heater/ a/c box. Good heater core and blower fan. Let me know what parts you need and make an offeer.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/402675_3079365631403_1481643354_33165409_133266396 9_n.jpg

1st gen pop-up headlights. Both have good motors, tops are painted green and have a few stone chips. - Make an offer

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/394521_3079359511250_1481643354_33165406_102678303 9_n.jpg

wiper arms, one is a little faded, but no rust at all. - make an offer

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/166947_3079349150991_1481643354_33165400_133114707 4_n.jpg

PTU from a 92TT, works fine - make an offer

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/409320_3079346110915_1481643354_33165398_209801177 1_n.jpg

[Austin@STM]

92 sunroof glass with all clips and seal with no problems - make an offer

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/395805_3079337710705_1481643354_33165395_196212112 8_n.jpg

[ntcmpjg]

Is the AC pump R134 or R12


Sent from my iPhone using Tapatalk

[Austin@STM]

Im not sure but being the stock pump from 92 it might be R12.

[DrGonzo]

A/C compressor will work fine for R134 or R12 as long and the system is flushed and the correct oil is used.

[Austin@STM]

^ thanks for the info.

More parts and pics added to post 2 and 3.

-Austin

[Austin@STM]

Added on my clutch for anyone looking for a great deal on the baddest clutch out there.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/189235_2250034458642_1481643354_32610535_3917918_n .jpg

[Austin@STM]

Pending sale on shocks/springs

[Austin@STM]

Also still have a full set of TT Brake Calipers and rotors, Rear steering delete kit and parts for a complete AWD swap. I will get more pictures soon.

[2fnloud]

1st or 2nd gen calipers? interested, but I am looking for 2nd gen.

[Austin@STM]

1st or 2nd gen calipers? interested, but I am looking for 2nd gen.

Complete 1st Gen brake set.

[Austin@STM]

springs/shocks and Maximal solid mounts are sold.

[Austin@STM]

digital climate control is sold.

[Austin@STM]

Digital Climate control is still available.

Also listed an AEM EMS for sale, check it out at the link below

http://www.3sgto.org/f62/aem-ems-series-1-ait-map-sensors-7475.html

[Austin@STM]

Few more parts added to the first post

[mehrshadvr4]

what's the lowest on passenger side window regulator?

[Austin@STM]

what do you wanna pay for it? Im open to offers on all parts, im not sure what they are all worth.

-Austin

[Austin@STM]

y-pipe w/coupler and clamps is sold

[mehrshadvr4]

what do you wanna pay for it? Im open to offers on all parts, im not sure what they are all worth.

-Austin
how about $50?

[Austin@STM]

Sounds good.

Paypal is thebird65@aol.com

-Austin

[DrGonzo]

Would you take $30.00 for the lower Acc pulley?

You could just throw it in the box with the silicone couplers I just order from STM, if you haven't shipped them yet.....

[Austin@STM]

Would you take $30.00 for the lower Acc pulley?

You could just throw it in the box with the silicone couplers I just order from STM, if you haven't shipped them yet.....

Sounds good to me.

Paypal is thebird65@aol.com

note - lower pulley

-Austin

[DrGonzo]

Moneys sent!!!

[Austin@STM]

Just to make sure i send the right one because i dont remember. Do you want the right one or the left?

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/374804_2995993347148_1481643354_33130802_427464195 _n.jpg

[DrGonzo]

Ohh God Man I Don't Remember....LOL

Let me look and see what I can find!!

[DrGonzo]

So looks like it's going to be the one on the right according to this pic:

http://i52.tinypic.com/ifx02h.jpg

Thanks n2nsanity!!!

[ricochet1490]

You wouldn't happen to have a timing belt cover would you? specifically the lower one?

[Austin@STM]

Sorry no timing covers, the motor is already gone.

[Austin@STM]

lower accesory pulley is sold.

[niterydr]

How is fitment with that carbon fiber hood? What hood pins are you using and where are they located?

[Austin@STM]

One of the best fitting hoods i have seen, i was very happy with it on there. The hood pins are bolted through the radiator support next to the headlights. They are Sparco hood pins.

Theres more pics and info in this thread - 91-93-vis-racing-carbon-fiber-hood-oem-style (http://www.3sgto.org/f62/91-93-vis-racing-carbon-fiber-hood-oem-style-6926.html)

http://www.streettunedmotorsports.com/z/austin_stealth/8_21_10_1.jpg

[Creative]

Do you still have the climate control box? I saw a post where you said it was still for sale

[Austin@STM]

yup still got it

[Creative]

How is the display and how much would you want?

[dsmnoob91]

How much for the complete awd set up for me to convert to? I have a 25 spline transfer case already So I won't need that

[mb3000]

Just out of curiosity, what were you looking to get for the lower intake manifold & cf hood? You can shoot me a PM if you'd like.