PDA

View Full Version : AWD Need Bearing Part #'s



DrGonzo
11-30-2011, 08:51 AM
If anyone has the transmission bearing part numbers I am needing to know the part numbers for the intermediate shaft bearing and the output shaft bearing, Both bearings are on the end case side.

Rock auto is showing Part # 32009x and 32010x but I don't know which is which.

Need to get these ASAP as I need to get these bearings on order.

Thanks Everyone!!!

DrGonzo
11-30-2011, 01:55 PM
Anyone?!?!?!?

J. Fast
11-30-2011, 10:38 PM
Input shaft bearing is 7133-07066336 from National Bearing (Transtar). They should be around $20 or so. The larger bearing is 7133-07066344, those are about $30.

Not sure about the OEM part number, but that bearing is the same as the oem bearing. I took the part number off of the package sleeve on a full 6 speed rebuild kit I have on hand.

DrGonzo
12-01-2011, 06:41 AM
Are those just the bearings for the intermediate shaft or is one of them the output shaft end bearing mounted to the VCU cover??

Here is what I found but it states 6spd.... I need 5spd or are they the same: 96 1996 Mitsubishi 3000GT Manual Trans Intermediate Shaft Bearing - Transmission - National, Left, Right - PartsGeek (http://www.partsgeek.com/catalog/1996/mitsubishi/3000gt/transmission/manual_trans_intermediate_shaft_bearing.html)

According to this site those part numbers are for the left and right intermediate shaft bearings.....

J. Fast
12-01-2011, 08:42 AM
They are the same...